Daily Papers

Recent years have seen a surge in deep learning approaches to accelerate numerical solvers, which provide faithful but computationally intensive simulations of the physical world. These deep surrogates are generally trained in a supervised manner from limited amounts of data slowly generated by the same solver they intend to accelerate. We propose an open-source framework that enables the online training of these models from a large ensemble run of simulations. It leverages multiple levels of parallelism to generate rich datasets. The framework avoids I/O bottlenecks and storage issues by directly streaming the generated data. A training reservoir mitigates the inherent bias of streaming while maximizing GPU throughput. Experiment on training a fully connected network as a surrogate for the heat equation shows the proposed approach enables training on 8TB of data in 2 hours with an accuracy improved by 47% and a batch throughput multiplied by 13 compared to a traditional offline procedure.

The performance of multi-turn, agentic LLM inference is increasingly dominated by KV-Cache storage I/O rather than computation. In prevalent disaggregated architectures, loading the massive KV-Cache from external storage creates a fundamental imbalance: storage NICs on prefill engines become bandwidth-saturated, while those on decoding engines remain idle. This asymmetry severely constrains overall system throughput. We present DualPath, an inference system that breaks this bottleneck by introducing dual-path KV-Cache loading. Beyond the traditional storage-to-prefill path, DualPath enables a novel storage-to-decode path, in which the KV-Cache is loaded into decoding engines and then efficiently transferred to prefill engines via RDMA over the compute network. DualPath combines this optimized data path -- which inherently avoids network congestion and avoids interference with latency-critical model execution communications -- with a global scheduler that dynamically balances load across prefill and decode engines. Our evaluation on three models with production agentic workloads demonstrates that DualPath improves offline inference throughput by up to 1.87times on our in-house inference system. It can also improve online serving throughput by an average factor of 1.96times without violating SLO.

Mixture-of-Experts (MoE) models enable scalable performance but face severe memory constraints on edge devices. Existing offloading strategies struggle with I/O bottlenecks due to the dynamic, low-information nature of autoregressive expert activation. In this paper, we propose to repurpose Speculative Decoding (SD) not merely as a compute accelerator, but as an informative lookahead sensor for memory management, supported by our theoretical and empirical analyses. Hence, we introduce MoE-SpAc, an MoE inference framework that integrates a Speculative Utility Estimator to track expert demand, a Heterogeneous Workload Balancer to dynamically partition computation via online integer optimization, and an Asynchronous Execution Engine to unify the prefetching and eviction in the same utility space. Extensive experiments on seven benchmarks demonstrate that MoE-SpAc achieves a 42% improvement in TPS over the SOTA SD-based baseline, and an average 4.04x speedup over all standard baselines. Code is available at https://github.com/lshAlgorithm/MoE-SpAc .

Large Language Models (LLMs) face challenges for on-device inference due to high memory demands. Traditional methods to reduce memory usage often compromise performance and lack adaptability. We propose FlexInfer, an optimized offloading framework for on-device inference, addressing these issues with techniques like asynchronous prefetching, balanced memory locking, and flexible tensor preservation. These strategies enhance memory efficiency and mitigate I/O bottlenecks, ensuring high performance within user-specified resource constraints. Experiments demonstrate that FlexInfer significantly improves throughput under limited resources, achieving up to 12.5 times better performance than existing methods and facilitating the deployment of large models on resource-constrained devices.

The Transformer architecture has significantly advanced natural language processing (NLP) and has been foundational in developing large language models (LLMs) such as LLaMA and OPT, which have come to dominate a broad range of NLP tasks. Despite their superior accuracy, LLMs present unique challenges in practical inference, concerning the compute and memory-intensive nature. Thanks to the autoregressive characteristic of LLM inference, KV caching for the attention layers in Transformers can effectively accelerate LLM inference by substituting quadratic-complexity computation with linear-complexity memory accesses. Yet, this approach requires increasing memory as demand grows for processing longer sequences. The overhead leads to reduced throughput due to I/O bottlenecks and even out-of-memory errors, particularly on resource-constrained systems like a single commodity GPU. In this paper, we propose ALISA, a novel algorithm-system co-design solution to address the challenges imposed by KV caching. On the algorithm level, ALISA prioritizes tokens that are most important in generating a new token via a Sparse Window Attention (SWA) algorithm. SWA introduces high sparsity in attention layers and reduces the memory footprint of KV caching at negligible accuracy loss. On the system level, ALISA employs three-phase token-level dynamical scheduling and optimizes the trade-off between caching and recomputation, thus maximizing the overall performance in resource-constrained systems. In a single GPU-CPU system, we demonstrate that under varying workloads, ALISA improves the throughput of baseline systems such as FlexGen and vLLM by up to 3X and 1.9X, respectively.

k-means has historically been positioned primarily as an offline processing primitive, typically used for dataset organization or embedding preprocessing rather than as a first-class component in online systems. In this work, we revisit this classical algorithm under the lens of modern AI system design and enable k-means as an online primitive. We point out that existing GPU implementations of k-means remain fundamentally bottlenecked by low-level system constraints rather than theoretical algorithmic complexity. Specifically, the assignment stage suffers from a severe IO bottleneck due to the massive explicit materialization of the N times K distance matrix in High Bandwidth Memory (HBM). Simultaneously, the centroid update stage is heavily penalized by hardware-level atomic write contention caused by irregular, scatter-style token aggregations. To bridge this performance gap, we propose flash-kmeans, an IO-aware and contention-free k-means implementation for modern GPU workloads. Flash-kmeans introduces two core kernel-level innovations: (1) FlashAssign, which fuses distance computation with an online argmin to completely bypass intermediate memory materialization; (2) sort-inverse update, which explicitly constructs an inverse mapping to transform high-contention atomic scatters into high-bandwidth, segment-level localized reductions. Furthermore, we integrate algorithm-system co-designs, including chunked-stream overlap and cache-aware compile heuristics, to ensure practical deployability. Extensive evaluations on NVIDIA H200 GPUs demonstrate that flash-kmeans achieves up to 17.9times end-to-end speedup over best baselines, while outperforming industry-standard libraries like cuML and FAISS by 33times and over 200times, respectively.

In recent times, the emergence of Large Language Models (LLMs) has resulted in increasingly larger model size, posing challenges for inference on low-resource devices. Prior approaches have explored offloading to facilitate low-memory inference but often suffer from efficiency due to I/O bottlenecks. To achieve low-latency LLMs inference on resource-constrained devices, we introduce HeteGen, a novel approach that presents a principled framework for heterogeneous parallel computing using CPUs and GPUs. Based on this framework, HeteGen further employs heterogeneous parallel computing and asynchronous overlap for LLMs to mitigate I/O bottlenecks. Our experiments demonstrate a substantial improvement in inference speed, surpassing state-of-the-art methods by over 317% at most.

Vision-language models (VLMs) show remarkable performance in multimodal tasks. However, excessively long multimodal inputs lead to oversized Key-Value (KV) caches, resulting in significant memory consumption and I/O bottlenecks. Previous KV quantization methods for Large Language Models (LLMs) may alleviate these issues but overlook the attention saliency differences of multimodal tokens, resulting in suboptimal performance. In this paper, we investigate the attention-aware token saliency patterns in VLM and propose AKVQ-VL. AKVQ-VL leverages the proposed Text-Salient Attention (TSA) and Pivot-Token-Salient Attention (PSA) patterns to adaptively allocate bit budgets. Moreover, achieving extremely low-bit quantization requires effectively addressing outliers in KV tensors. AKVQ-VL utilizes the Walsh-Hadamard transform (WHT) to construct outlier-free KV caches, thereby reducing quantization difficulty. Evaluations of 2-bit quantization on 12 long-context and multimodal tasks demonstrate that AKVQ-VL maintains or even improves accuracy, outperforming LLM-oriented methods. AKVQ-VL can reduce peak memory usage by 2.13x, support up to 3.25x larger batch sizes and 2.46x throughput.

AlphaFold predicts protein structures from the amino acid sequence at or near experimental resolution, solving the 50-year-old protein folding challenge, leading to progress by transforming large-scale genomics data into protein structures. AlphaFold will also greatly change the scientific research model from low-throughput to high-throughput manner. The AlphaFold framework is a mixture of two types of workloads: MSA construction based on CPUs and model inference on GPUs. The first CPU stage dominates the overall runtime, taking hours for a single protein due to the large database sizes and I/O bottlenecks. However, GPUs in this CPU stage remain idle, resulting in low GPU utilization and restricting the capacity of large-scale structure predictions. Therefore, we proposed ParaFold, an open-source parallel version of AlphaFold for high throughput protein structure predictions. ParaFold separates the CPU and GPU parts to enable large-scale structure predictions. ParaFold also effectively reduces the CPU and GPU runtime with two optimizations without compromising the quality of prediction results: using multi-threaded parallelism on CPUs and using optimized JAX compilation on GPUs. We evaluated ParaFold with three datasets of different size and protein lengths. We evaluated the accuracy and efficiency of optimizations on CPUs and GPUs, and showed the large-scale prediction capability by running ParaFold inferences of 19,704 small proteins in five hours on one NVIDIA DGX-2. Using the JAX compile optimization, ParaFold attained a 13.8X average speedup over AlphaFold. ParaFold offers a rapid and effective approach for high-throughput structure predictions, leveraging the predictive power by running on supercomputers, with shorter time, and at a lower cost. The development of ParaFold will greatly speed up high-throughput studies and render the protein "structure-omics" feasible.

Graphical User Interface (GUI) agents have emerged as a promising paradigm for intelligent systems that perceive and interact with graphical interfaces visually. Yet supervised fine-tuning alone cannot handle long-horizon credit assignment, distribution shifts, and safe exploration in irreversible environments, making Reinforcement Learning (RL) a central methodology for advancing automation. In this work, we present the first comprehensive overview of the intersection between RL and GUI agents, and examine how this research direction may evolve toward digital inhabitants. We propose a principled taxonomy that organizes existing methods into Offline RL, Online RL, and Hybrid Strategies, and complement it with analyses of reward engineering, data efficiency, and key technical innovations. Our analysis reveals several emerging trends: the tension between reliability and scalability is motivating the adoption of composite, multi-tier reward architectures; GUI I/O latency bottlenecks are accelerating the shift toward world-model-based training, which can yield substantial performance gains; and the spontaneous emergence of System-2-style deliberation suggests that explicit reasoning supervision may not be necessary when sufficiently rich reward signals are available. We distill these findings into a roadmap covering process rewards, continual RL, cognitive architectures, and safe deployment, aiming to guide the next generation of robust GUI automation and its agent-native infrastructure.

Diffusion Large Language Models (dLLMs) have emerged as a competitive alternative to autoregressive (AR) models, offering better hardware utilization and bidirectional context through parallel block-level decoding. However, as dLLMs continue to scale up with mixture-of-experts (MoE) architectures, their deployment on resource-constrained devices remains an open challenge. Existing AR-based methods often incur either prohibitive I/O overhead or significant compute bottlenecks. In this work, we propose TIDE, a novel resource-efficient inference system that leverages the temporal stability of expert activations during the diffusion process within the block. Specifically, we leverage the temporal stability of expert activations during the diffusion process within the block and introduce an interval-based expert refresh strategy that updates the expert placement in an I/O-aware fashion. To ensure optimal performance, we formulate the inference scheduling as a mathematical programming problem, solving for the optimal interval that minimizes I/O traffic and CPU computation. Most importantly, TIDE is a lossless optimization that requires no model training, providing a "free lunch" acceleration for dLLM inference. In a single GPU-CPU system, we demonstrate that TIDE achieves up to 1.4times and 1.5times throughput improvements over prior baselines on LLaDA2.0-mini and LLaDA2.0-flash models, respectively.

Convolution models with long filters have demonstrated state-of-the-art reasoning abilities in many long-sequence tasks but lag behind the most optimized Transformers in wall-clock time. A major bottleneck is the Fast Fourier Transform (FFT)--which allows long convolutions to run in O(N logN) time in sequence length N but has poor hardware utilization. In this paper, we study how to optimize the FFT convolution. We find two key bottlenecks: the FFT does not effectively use specialized matrix multiply units, and it incurs expensive I/O between layers of the memory hierarchy. In response, we propose FlashFFTConv. FlashFFTConv uses a matrix decomposition that computes the FFT using matrix multiply units and enables kernel fusion for long sequences, reducing I/O. We also present two sparse convolution algorithms--1) partial convolutions and 2) frequency-sparse convolutions--which can be implemented simply by skipping blocks in the matrix decomposition, enabling further opportunities for memory and compute savings. FlashFFTConv speeds up exact FFT convolutions by up to 7.93times over PyTorch and achieves up to 4.4times speedup end-to-end. Given the same compute budget, FlashFFTConv allows Hyena-GPT-s to achieve 2.3 points better perplexity on the PILE and M2-BERT-base to achieve 3.3 points higher GLUE score--matching models with twice the parameter count. FlashFFTConv also achieves 96.1% accuracy on Path-512, a high-resolution vision task where no model had previously achieved better than 50%. Furthermore, partial convolutions enable longer-sequence models--yielding the first DNA model that can process the longest human genes (2.3M base pairs)--and frequency-sparse convolutions speed up pretrained models while maintaining or improving model quality.

While frontier large language models (LLMs) continue to push capability boundaries, their deployment remains confined to GPU-powered cloud infrastructure. We challenge this paradigm with SmallThinker, a family of LLMs natively designed - not adapted - for the unique constraints of local devices: weak computational power, limited memory, and slow storage. Unlike traditional approaches that mainly compress existing models built for clouds, we architect SmallThinker from the ground up to thrive within these limitations. Our innovation lies in a deployment-aware architecture that transforms constraints into design principles. First, We introduce a two-level sparse structure combining fine-grained Mixture-of-Experts (MoE) with sparse feed-forward networks, drastically reducing computational demands without sacrificing model capacity. Second, to conquer the I/O bottleneck of slow storage, we design a pre-attention router that enables our co-designed inference engine to prefetch expert parameters from storage while computing attention, effectively hiding storage latency that would otherwise cripple on-device inference. Third, for memory efficiency, we utilize NoPE-RoPE hybrid sparse attention mechanism to slash KV cache requirements. We release SmallThinker-4B-A0.6B and SmallThinker-21B-A3B, which achieve state-of-the-art performance scores and even outperform larger LLMs. Remarkably, our co-designed system mostly eliminates the need for expensive GPU hardware: with Q4_0 quantization, both models exceed 20 tokens/s on ordinary consumer CPUs, while consuming only 1GB and 8GB of memory respectively. SmallThinker is publicly available at hf.co/PowerInfer/SmallThinker-4BA0.6B-Instruct and hf.co/PowerInfer/SmallThinker-21BA3B-Instruct.

Large-scale AI training is now fundamentally a distributed systems problem, and hardware failures have become routine operating conditions rather than rare exceptions. Public operational evidence from production training clusters, however, remains scarce. This technical report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The cluster operates within a cross-organizational environment in which five parties (SKT, Upstage, Lablup, NVIDIA Korea, and VAST Data) share a unified monitoring pipeline. This arrangement enabled joint diagnosis of a 60-node-scale storage I/O bottleneck that did not appear at 2-4-node scale, a production-scale phenomenon no single team could isolate alone. Drawing on a months-long pre-training campaign, we perform three quantitative analyses yielding four findings. First, statistical analysis over 751 Prometheus metrics and 10 XID-identified GPU failures achieves a 10/10 detection rate (2/10 pre-XID) at ~0.84 false positives per day. No single metric is consistently dominant across failure types, motivating a multi-signal detection strategy. Second, profiling 523 checkpoint events along the GPU VRAM to NFS path attributes the "bandwidth paradox" (1.4-10.4% utilization of 200 Gbps RoCE) to saturation of the 128-slot NFS RPC layer. Third, multi-node failure response shows concentrated exclusions (top 3 of 63 nodes account for >50% of all exclusions) and an auto-retry chain success rate of 33.3% over 12 chains (73 attempts), 2.7x the 12.5% manual recovery rate; the median retry interval is 11 min (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

The spatiotemporal resolution of Partial Differential Equations (PDEs) plays important roles in the mathematical description of the world's physical phenomena. In general, scientists and engineers solve PDEs numerically by the use of computationally demanding solvers. Recently, deep learning algorithms have emerged as a viable alternative for obtaining fast solutions for PDEs. Models are usually trained on synthetic data generated by solvers, stored on disk and read back for training. This paper advocates that relying on a traditional static dataset to train these models does not allow the full benefit of the solver to be used as a data generator. It proposes an open source online training framework for deep surrogate models. The framework implements several levels of parallelism focused on simultaneously generating numerical simulations and training deep neural networks. This approach suppresses the I/O and storage bottleneck associated with disk-loaded datasets, and opens the way to training on significantly larger datasets. Experiments compare the offline and online training of four surrogate models, including state-of-the-art architectures. Results indicate that exposing deep surrogate models to more dataset diversity, up to hundreds of GB, can increase model generalization capabilities. Fully connected neural networks, Fourier Neural Operator (FNO), and Message Passing PDE Solver prediction accuracy is improved by 68%, 16% and 7%, respectively.

Self-attention is at the heart of the popular Transformer architecture, yet suffers from quadratic time and memory complexity. The breakthrough FlashAttention algorithm revealed I/O complexity as the true bottleneck in scaling Transformers. Given two levels of memory hierarchy, a fast cache (e.g. GPU on-chip SRAM) and a slow memory (e.g. GPU high-bandwidth memory), the I/O complexity measures the number of accesses to memory. FlashAttention computes attention using N^2d^2{M} I/O operations where N is the dimension of the attention matrix, d the head-dimension and M the cache size. However, is this I/O complexity optimal? The known lower bound only rules out an I/O complexity of o(Nd) when M=Theta(Nd), since the output that needs to be written to slow memory is Omega(Nd). This leads to the main question of our work: Is FlashAttention I/O optimal for all values of M? We resolve the above question in its full generality by showing an I/O complexity lower bound that matches the upper bound provided by FlashAttention for any values of M geq d^2 within any constant factors. Further, we give a better algorithm with lower I/O complexity for M < d^2, and show that it is optimal as well. Moreover, our lower bounds do not rely on using combinatorial matrix multiplication for computing the attention matrix. We show even if one uses fast matrix multiplication, the above I/O complexity bounds cannot be improved. We do so by introducing a new communication complexity protocol for matrix compression, and connecting communication complexity to I/O complexity. To the best of our knowledge, this is the first work to establish a connection between communication complexity and I/O complexity, and we believe this connection could be of independent interest and will find many more applications in proving I/O complexity lower bounds in the future.

LLM serving relies on prefix caching to improve inference performance. As growing contexts push key-value (KV) cache footprint far beyond GPU HBM and CPU DRAM capacity, KV cache is increasingly offloaded to NVMe SSDs. Unfortunately, restoring KV cache from SSDs suffers from poor I/O performance and incurs significant GPU stalls. This is primarily because the fragmented GPU memory layout results in a massive number of tiny random I/Os, rendering the low-parallelism CPU a severe bottleneck even with GPU Direct Storage (GDS), which still relies on CPU intervention to initiate each I/O and thus remains CPU-centric. This paper presents Tutti, an efficient SSD-backed KV caching solution that eliminates CPU intervention from the critical data and I/O control paths between HBM and SSDs. At the core of Tutti is a GPU-centric KV cache object store, in which the CPU is only responsible for asynchronously loading I/O kernels once per layer to the GPU. Tutti saturates NVMe SSD bandwidth and reduces GPU stalls to near zero through the following designs: (i) we provide a GPU-native object abstraction that enables bulk KV cache transfers and management; (ii) we re-architect the GPU storage stack by introducing GPU io_uring to support asynchronous GPU direct object I/O; and (iii) we propose slack-aware I/O scheduling to avoid GPU resource contention. We have implemented Tutti and integrated it to vLLM. Extensive evaluation shows that compared to the state-of-the-art GDS-enabled, SSD-backed LMCache, Tutti reduces TTFT by 78.3% under strict SLO constraints and improves the achievable request rate by 2x. The serving cost is reduced by 27%. Tutti achieves nearly the same inference performance as DRAM-backed LMCache, while providing almost infinite capacity.

Checkpointing to preserve training states is crucial during the development of Large Foundation Models (LFMs), for training resumption upon various failures or changes in GPU resources and parallelism configurations. In addition, saved checkpoints are dispatched to evaluation tasks or transferred across different training stages (e.g., from pre-training to post-training). All these scenarios require resharding distributed checkpoints from one parallelism to another. In production environments, different LFMs are trained with various frameworks and storage backends, depending on model sizes and training scales. A high-performance checkpointing system is needed to enable efficient checkpoint management at scale throughout the lifecycle of LFM development. We introduce ByteCheckpoint, an industrial-grade checkpointing system for large-scale LFM training. ByteCheckpoint features: a parallelism-agnostic checkpoint representation that enables efficient load-time checkpoint resharding; a generic checkpoint saving/loading workflow to accommodate multiple training frameworks and support different storage backends; full-stack optimizations to ensure high I/O efficiency and scalability; a suite of monitoring tools to streamline large-scale performance analysis and bottleneck detection. Compared to existing open-source checkpointing systems [52, 58], ByteCheckpoint significantly reduces runtime checkpoint stalls, achieving an average reduction of 54.20x. For saving and loading times, ByteCheckpoint achieves improvements of up to 9.96x and 8.80x, respectively.

Generative Reward Models (GRMs) have attracted considerable research interest in reward modeling due to their interpretability, inference-time scalability, and potential for refinement through reinforcement learning (RL). However, widely used pairwise GRMs create a computational bottleneck when integrated with RL algorithms such as Group Relative Policy Optimization (GRPO). This bottleneck arises from two factors: (i) the O(n^2) time complexity of pairwise comparisons required to obtain relative scores, and (ii) the computational overhead of repeated sampling or additional chain-of-thought (CoT) reasoning to improve performance. To address the first factor, we propose Intergroup Relative Preference Optimization (IRPO), a novel RL framework that incorporates the well-established Bradley-Terry model into GRPO. By generating a pointwise score for each response, IRPO enables efficient evaluation of arbitrarily many candidates during RL training while preserving interpretability and fine-grained reward signals. Experimental results demonstrate that IRPO achieves state-of-the-art (SOTA) performance among pointwise GRMs across multiple benchmarks, with performance comparable to that of current leading pairwise GRMs. Furthermore, we show that IRPO significantly outperforms pairwise GRMs in post-training evaluations.

Clustering non-Euclidean data is difficult, and one of the most used algorithms besides hierarchical clustering is the popular algorithm Partitioning Around Medoids (PAM), also simply referred to as k-medoids clustering. In Euclidean geometry the mean-as used in k-means-is a good estimator for the cluster center, but this does not exist for arbitrary dissimilarities. PAM uses the medoid instead, the object with the smallest dissimilarity to all others in the cluster. This notion of centrality can be used with any (dis-)similarity, and thus is of high relevance to many domains and applications. A key issue with PAM is its high run time cost. We propose modifications to the PAM algorithm that achieve an O(k)-fold speedup in the second ("SWAP") phase of the algorithm, but will still find the same results as the original PAM algorithm. If we relax the choice of swaps performed (while retaining comparable quality), we can further accelerate the algorithm by eagerly performing additional swaps in each iteration. With the substantially faster SWAP, we can now explore faster initialization strategies, because (i) the classic ("BUILD") initialization now becomes the bottleneck, and (ii) our swap is fast enough to compensate for worse starting conditions. We also show how the CLARA and CLARANS algorithms benefit from the proposed modifications. While we do not study the parallelization of our approach in this work, it can easily be combined with earlier approaches to use PAM and CLARA on big data (some of which use PAM as a subroutine, hence can immediately benefit from these improvements), where the performance with high k becomes increasingly important. In experiments on real data with k=100,200, we observed a 458x respectively 1191x speedup compared to the original PAM SWAP algorithm, making PAM applicable to larger data sets, and in particular to higher k.

Data movement between the CPU and main memory is a first-order obstacle against improving performance, scalability, and energy efficiency in modern systems. Computer systems employ a range of techniques to reduce overheads tied to data movement, spanning from traditional mechanisms (e.g., deep multi-level cache hierarchies, aggressive hardware prefetchers) to emerging techniques such as Near-Data Processing (NDP), where some computation is moved close to memory. Our goal is to methodically identify potential sources of data movement over a broad set of applications and to comprehensively compare traditional compute-centric data movement mitigation techniques to more memory-centric techniques, thereby developing a rigorous understanding of the best techniques to mitigate each source of data movement. With this goal in mind, we perform the first large-scale characterization of a wide variety of applications, across a wide range of application domains, to identify fundamental program properties that lead to data movement to/from main memory. We develop the first systematic methodology to classify applications based on the sources contributing to data movement bottlenecks. From our large-scale characterization of 77K functions across 345 applications, we select 144 functions to form the first open-source benchmark suite (DAMOV) for main memory data movement studies. We select a diverse range of functions that (1) represent different types of data movement bottlenecks, and (2) come from a wide range of application domains. Using NDP as a case study, we identify new insights about the different data movement bottlenecks and use these insights to determine the most suitable data movement mitigation mechanism for a particular application. We open-source DAMOV and the complete source code for our new characterization methodology at https://github.com/CMU-SAFARI/DAMOV.

I/O performance is crucial to efficiency in data-intensive scientific computing; but tuning large-scale storage systems is complex, costly, and notoriously manpower-intensive, making it inaccessible for most domain scientists. To address this problem, we propose STELLAR, an autonomous tuner for high-performance parallel file systems. Our evaluations show that STELLAR almost always selects near-optimal parameter configurations for parallel file systems within the first five attempts, even for previously unseen applications. STELLAR differs fundamentally from traditional autotuning methods, which often require hundreds of thousands of iterations to converge. Powered by large language models (LLMs), STELLAR enables autonomous end-to-end agentic tuning by (1) accurately extracting tunable parameters from software manuals, (2) analyzing I/O trace logs generated by applications, (3) selecting initial tuning strategies, (4) rerunning applications on real systems and collecting I/O performance feedback, (5) adjusting tuning strategies and repeating the tuning cycle, and (6) reflecting on and summarizing tuning experiences into reusable knowledge for future optimizations. STELLAR integrates retrieval-augmented generation (RAG), tool execution, LLM-based reasoning, and a multiagent design to stabilize reasoning and combat hallucinations. We evaluate the impact of each component on optimization outcomes, providing design insights for similar systems in other optimization domains. STELLAR's architecture and empirical results highlight a promising approach to complex system optimization, especially for problems with large search spaces and high exploration costs, while making I/O tuning more accessible to domain scientists with minimal added resources.

Serving numerous users and requests concurrently requires good fairness in Large Language Models (LLMs) serving system. This ensures that, at the same cost, the system can meet the Service Level Objectives (SLOs) of more users , such as time to first token (TTFT) and time between tokens (TBT), rather than allowing a few users to experience performance far exceeding the SLOs. To achieve better fairness, the preemption-based scheduling policy dynamically adjusts the priority of each request to maintain balance during runtime. However, existing systems tend to overly prioritize throughput, overlooking the overhead caused by preemption-induced context switching, which is crucial for maintaining fairness through priority adjustments. In this work, we identify three main challenges that result in this overhead. 1) Inadequate I/O utilization. 2) GPU idleness. 3) Unnecessary I/O transmission during multi-turn conversations. Our key insight is that the block-based KV cache memory policy in existing systems, while achieving near-zero memory waste, leads to discontinuity and insufficient granularity in the KV cache memory. To respond, we introduce FastSwitch, a fairness-aware serving system that not only aligns with existing KV cache memory allocation policy but also mitigates context switching overhead. Our evaluation shows that FastSwitch outperforms the state-of-the-art LLM serving system vLLM with speedups of 1.4-11.2x across different tail TTFT and TBT.

Monolithic serving with chunked prefill improves GPU utilization by batching prefill and decode together, but suffers from fine-grained phase interference. Engine-level prefill-decode (PD) disaggregation avoids interference but incurs higher hardware and coordination overhead. Prior intra-GPU disaggregation approaches multiplex prefill and decode within a single GPU, using SLO-based tuning guided by heuristics from offline profiling or reactive feedback loops. However, these methods respond reactively to performance issues rather than anticipating them, limiting adaptability under dynamic workloads. We ask: can we achieve proactive intra-GPU disaggregation that adapts effectively to dynamic workloads? The key challenge lies in managing the conflicting resource demands of prefill and decode under varying conditions. We first show that GPU resources exhibit diminishing returns -- beyond a saturation point, more allocation yields minimal latency benefit. Second, we observe that memory bandwidth contention becomes a critical bottleneck. These insights motivate a design that dynamically partitions GPU resources across prefill and decode phases, while jointly considering compute capacity, memory footprint, and bandwidth contention. Evaluated on diverse LLMs and workloads, our system Nexus achieves up to 2.2x higher throughput, 20x lower TTFT, and 2.5x lower TBT than vLLM; outperforms SGLang by up to 2x; and matches or exceeds disaggregated vLLM.

LLMs have seen rapid adoption in all domains. They need to be trained on high-end high-performance computing (HPC) infrastructures and ingest massive amounts of input data. Unsurprisingly, at such a large scale, unexpected events (e.g., failures of components, instability of the software, undesirable learning patterns, etc.), are frequent and typically impact the training in a negative fashion. Thus, LLMs need to be checkpointed frequently so that they can be rolled back to a stable state and subsequently fine-tuned. However, given the large sizes of LLMs, a straightforward checkpointing solution that directly writes the model parameters and optimizer state to persistent storage (e.g., a parallel file system), incurs significant I/O overheads. To address this challenge, in this paper we study how to reduce the I/O overheads for enabling fast and scalable checkpointing for LLMs that can be applied at high frequency (up to the granularity of individual iterations) without significant impact on the training process. Specifically, we introduce a lazy asynchronous multi-level approach that takes advantage of the fact that the tensors making up the model and optimizer state shards remain immutable for extended periods of time, which makes it possible to copy their content in the background with minimal interference during the training process. We evaluate our approach at scales of up to 180 GPUs using different model sizes, parallelism settings, and checkpointing frequencies. The results show up to 48times faster checkpointing and 2.2times faster end-to-end training runtime compared with the state-of-art checkpointing approaches.

The availability of unprecedented unsupervised training data, along with neural scaling laws, has resulted in an unprecedented surge in model size and compute requirements for serving/training LLMs. However, the main performance bottleneck is increasingly shifting to memory bandwidth. Over the past 20 years, peak server hardware FLOPS has been scaling at 3.0x/2yrs, outpacing the growth of DRAM and interconnect bandwidth, which have only scaled at 1.6 and 1.4 times every 2 years, respectively. This disparity has made memory, rather than compute, the primary bottleneck in AI applications, particularly in serving. Here, we analyze encoder and decoder Transformer models and show how memory bandwidth can become the dominant bottleneck for decoder models. We argue for a redesign in model architecture, training, and deployment strategies to overcome this memory limitation.

KV cache compression promises increased throughput and efficiency with negligible loss in performance. While the gains in throughput are indisputable and recent literature has indeed shown minimal degradation on particular benchmarks, in general the consequences of compression in realistic scenarios such as multi-instruction prompting have been insufficiently studied. In this paper, we identify several pitfalls practitioners should be aware of when deploying KV cache compressed LLMs. Importantly, we show that certain instructions degrade much more rapidly with compression, effectively causing them to be completely ignored by the LLM. As a practical example of that, we highlight system prompt leakage as a case study, empirically showing the impact of compression on leakage and general instruction following. We show several factors that play a role in prompt leakage: compression method, instruction order, and KV eviction bias. We then propose simple changes to KV cache eviction policies that can reduce the impact of these factors and improve the overall performance in multi-instruction tasks.

LAPS identifies and disaggregates requests with different prompt lengths in LLM serving to reduce TTFT latency. While recent systems have decoupled the prefill and decode stages to improve throughput, they still rely on unified scheduling policies that fail to adapt to heterogeneous workload characteristics. We observe that prompt-length variations lead to distinct performance bottlenecks, motivating an adaptive scheduling strategy. LAPS disaggregates multi-turn long-prefill requests from short-prefill ones and introduces a length-aware smart batching mechanism for short-prefill workloads. It adopts a dual-queue design that supports temporal disaggregation on a single prefill instance or spatial disaggregation across multiple instances. For short-prefill batches, a batch waiting window and CUDA Graph-based clustering mitigate interference from heterogeneous computation, reducing batching delay and lowering average latency. In real multi-turn workloads, LAPS reduces prefill latency by over 30\% compared to vanilla SGLang under prefill-decode disaggregation, and further decreases SLO violations by 28\% in multi-instance deployments with vanilla data-parallel configuration. Compared to the SGLang router with load balancing, it further lowers SLO violations by 12\% in multi-GPU settings. Under high concurrency and mixed-request scenarios, LAPS improves request throughput by 35\% serving Qwen2.5-32B model for prefill instance, demonstrating its effectiveness in optimizing heterogeneous LLM serving workloads.

Large model inference is shifting from cloud to edge due to concerns about the privacy of user interaction data. However, edge devices often struggle with limited computing power, memory, and bandwidth, requiring collaboration across multiple devices to run and speed up LLM inference. Pipeline parallelism, the mainstream solution, is inefficient for single-user scenarios, while tensor parallelism struggles with frequent communications. In this paper, we argue that tensor parallelism can be more effective than pipeline on low-resource devices, and present a compute- and memory-efficient tensor parallel inference system, named TPI-LLM, to serve 70B-scale models. TPI-LLM keeps sensitive raw data local in the users' devices and introduces a sliding window memory scheduler to dynamically manage layer weights during inference, with disk I/O latency overlapped with the computation and communication. This allows larger models to run smoothly on memory-limited devices. We analyze the communication bottleneck and find that link latency, not bandwidth, emerges as the main issue, so a star-based allreduce algorithm is implemented. Through extensive experiments on both emulated and real testbeds, TPI-LLM demonstrated over 80% less time-to-first-token and token latency compared to Accelerate, and over 90% compared to Transformers and Galaxy, while cutting the peak memory footprint of Llama 2-70B by 90%, requiring only 3.1 GB of memory for 70B-scale models.

Monolithic large language models (LLMs) like GPT-4 have paved the way for modern generative AI applications. Training, serving, and maintaining monolithic LLMs at scale, however, remains prohibitively expensive and challenging. The disproportionate increase in compute-to-memory ratio of modern AI accelerators have created a memory wall, necessitating new methods to deploy AI. Composition of Experts (CoE) is an alternative modular approach that lowers the cost and complexity of training and serving. However, this approach presents two key challenges when using conventional hardware: (1) without fused operations, smaller models have lower operational intensity, which makes high utilization more challenging to achieve; and (2) hosting a large number of models can be either prohibitively expensive or slow when dynamically switching between them. In this paper, we describe how combining CoE, streaming dataflow, and a three-tier memory system scales the AI memory wall. We describe Samba-CoE, a CoE system with 150 experts and a trillion total parameters. We deploy Samba-CoE on the SambaNova SN40L Reconfigurable Dataflow Unit (RDU) - a commercial dataflow accelerator architecture that has been co-designed for enterprise inference and training applications. The chip introduces a new three-tier memory system with on-chip distributed SRAM, on-package HBM, and off-package DDR DRAM. A dedicated inter-RDU network enables scaling up and out over multiple sockets. We demonstrate speedups ranging from 2x to 13x on various benchmarks running on eight RDU sockets compared with an unfused baseline. We show that for CoE inference deployments, the 8-socket RDU Node reduces machine footprint by up to 19x, speeds up model switching time by 15x to 31x, and achieves an overall speedup of 3.7x over a DGX H100 and 6.6x over a DGX A100.

Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), and costly memory accesses, the need for large contiguous memory blocks, and complex OS modifications (for software-managed TLBs). We present Victima, a new software-transparent mechanism that drastically increases the translation reach of the processor by leveraging the underutilized resources of the cache hierarchy. The key idea of Victima is to repurpose L2 cache blocks to store clusters of TLB entries, thereby providing an additional low-latency and high-capacity component that backs up the last-level TLB and thus reduces PTWs. Victima has two main components. First, a PTW cost predictor (PTW-CP) identifies costly-to-translate addresses based on the frequency and cost of the PTWs they lead to. Second, a TLB-aware cache replacement policy prioritizes keeping TLB entries in the cache hierarchy by considering (i) the translation pressure (e.g., last-level TLB miss rate) and (ii) the reuse characteristics of the TLB entries. Our evaluation results show that in native (virtualized) execution environments Victima improves average end-to-end application performance by 7.4% (28.7%) over the baseline four-level radix-tree-based page table design and by 6.2% (20.1%) over a state-of-the-art software-managed TLB, across 11 diverse data-intensive workloads. Victima (i) is effective in both native and virtualized environments, (ii) is completely transparent to application and system software, and (iii) incurs very small area and power overheads on a modern high-end CPU.

This report evaluates the performance impact of enabling Trusted Execution Environments (TEE) on NVIDIA Hopper GPUs for large language model (LLM) inference tasks. We benchmark the overhead introduced by TEE mode across various LLMs and token lengths, with a particular focus on the bottleneck caused by CPU-GPU data transfers via PCIe. Our results indicate that while there is minimal computational overhead within the GPU, the overall performance penalty is primarily attributable to data transfer. For the majority of typical LLM queries, the overhead remains below 7%, with larger models and longer sequences experiencing nearly zero overhead.

Standard transport protocols like TCP operate as a blind, FIFO conveyor belt for data, a model that is increasingly suboptimal for latency-sensitive and interactive applications. This paper challenges this model by introducing CATS (Conductor-driven Asymmetric Transport Scheme), a framework that provides TCP with the semantic awareness necessary to prioritize critical content. By centralizing scheduling intelligence in a transport-native "Conductor", CATS significantly improves user-perceived performance by delivering essential data first. This architecture directly confronts a cascade of historical performance workarounds and their limitations, including the high overhead of parallel connections in HTTP/1.1, the transport-layer Head-of-Line blocking in HTTP/2, and the observed implementation heterogeneity of prioritization in HTTP/3 over QUIC. Built upon TCP BBR, our ns-3 implementation demonstrates this principle by reducing the First Contentful Paint by over 78% in a representative webpage download configured as a deliberate worst-case scenario, with no penalty to total page load time compared to the baseline.

AI agents are increasingly deployed in multi-tenant cloud environments, where they execute diverse tool calls within sandboxed containers, each call with distinct resource demands and rapid fluctuations. We present a systematic characterization of OS-level resource dynamics in sandboxed AI coding agents, analyzing 144 software engineering tasks from the SWE-rebench benchmark across two LLM models. Our measurements reveal that (1) OS-level execution (tool calls, container and agent initialization) accounts for 56-74% of end-to-end task latency; (2) memory, not CPU, is the concurrency bottleneck; (3) memory spikes are tool-call-driven with a up to 15.4x peak-to-average ratio; and (4) resource demands are highly unpredictable across tasks, runs, and models. Comparing these characteristics against serverless, microservice, and batch workloads, we identify three mismatches in existing resource controls: a granularity mismatch (container-level policies vs. tool-call-level dynamics), a responsiveness mismatch (user-space reaction vs. sub-second unpredictable bursts), and an adaptability mismatch (history-based prediction vs. non-deterministic stateful execution). We propose AgentCgroup, an intent-driven eBPF-based resource controller that exploits agents ability to declare resource needs and reconstruct execution strategies, using hierarchical cgroup structures aligned with tool-call boundaries, in-kernel enforcement via sched_ext and memcg_bpf_ops, and runtime-adaptive policies. Preliminary evaluation demonstrates improved multi-tenant isolation and reduced resource waste. AgentCgroup is open-source at https://github.com/eunomia-bpf/agentcgroup

Self-forcing video generation extends a short-horizon video model to longer rollouts by repeatedly feeding generated content back in as context. This scaling path immediately exposes a systems bottleneck: the key-value (KV) cache grows with rollout length, so longer videos require not only better generation quality but also substantially better memory behavior. We present a comprehensive empirical study of KV-cache compression for self-forcing video generation on a Wan2.1-based Self-Forcing stack. Our study covers 33 quantization and cache-policy variants, 610 prompt-level observations, and 63 benchmark-level summaries across two evaluation settings: MovieGen for single-shot 10-second generation and StoryEval for longer narrative-style stability. We jointly evaluate peak VRAM, runtime, realized compression ratio, VBench imaging quality, BF16-referenced fidelity (SSIM, LPIPS, PSNR), and terminal drift. Three findings are robust. First, the strongest practical operating region is a FlowCache-inspired soft-prune INT4 adaptation, which reaches 5.42-5.49x compression while reducing peak VRAM from 19.28 GB to about 11.7 GB with only modest runtime overhead. Second, the highest-fidelity compressed methods, especially PRQ_INT4 and QUAROT_KV_INT4, are not the best deployment choices because they preserve quality at severe runtime or memory cost. Third, nominal compression alone is not sufficient: several methods shrink KV storage but still exceed BF16 peak VRAM because the current integration reconstructs or retains large BF16 buffers during attention and refresh stages. The result is a benchmark harness, analysis workflow, and empirical map of which KV-cache ideas are practical today and which are promising research directions for better memory integration. Code, data products, and the presentation dashboard are available at https://github.com/suraj-ranganath/kv-quant-longhorizon/.

The increasing usage of Large Language Models (LLMs) has resulted in a surging demand for planet-scale serving systems, where tens of thousands of GPUs continuously serve hundreds of millions of users. Consequently, throughput (under reasonable latency constraints) has emerged as a key metric that determines serving systems' performance. To boost throughput, various methods of inter-device parallelism (e.g., data, tensor, pipeline) have been explored. However, existing methods do not consider overlapping the utilization of different resources within a single device, leading to underutilization and sub-optimal performance. We propose NanoFlow, a novel serving framework that exploits intra-device parallelism, which overlaps the usage of resources including compute, memory, and network within a single device through operation co-scheduling. To exploit intra-device parallelism, NanoFlow introduces two key innovations: First, NanoFlow splits requests into nano-batches at the granularity of operations, which breaks the dependency of sequential operations in LLM inference and enables overlapping; then, to get benefit from overlapping, NanoFlow uses an operation-level pipeline with execution unit scheduling, which partitions the device's functional units and simultaneously executes different operations in each unit. NanoFlow automates the pipeline setup using a parameter search algorithm, which enables easily porting NanoFlow to different models. We implement NanoFlow on NVIDIA GPUs and evaluate end-to-end serving throughput on several popular models such as LLaMA-2-70B, Mixtral 8x7B, LLaMA-3-8B, etc.. With practical workloads, NanoFlow provides 1.91x throughput boost compared to state-of-the-art serving systems achieving 59% to 72% of optimal throughput across ported models.

Large Language Models (LLMs) are increasingly deployed in both latency-sensitive online services and cost-sensitive offline workloads. Co-locating these workloads on shared serving instances can improve resource utilization, but directly applying this approach to Prefill/Decode (P/D) disaggregated systems introduces severe load imbalance, as fluctuating request mixes alter the intrinsic P/D ratio. Existing dynamic adjustment techniques cannot keep up with the bursty traffic patterns of online services. We propose a latency-constraint disaggregated architecture, which separates cluster resources into latency-strict and latency-relaxed pools based on task latency requirements. This design enables flexible placement of offline decode tasks, mitigating P/D imbalance while preserving online performance. To fully exploit this flexibility, we propose (1) a bottleneck-based scheduler guided by a Roofline-based performance model for performance bottleneck based scheduling, and (2) a fast preemption mechanism that strictly enforces Service Level Objectives (SLOs) for online requests. Experiments on real-world traces show that compared to existing offline system approaches, our method improves offline throughput by up to 3x, while maintaining online request SLOs.

The Information Bottleneck (IB) method frequently suffers from unstable optimization, characterized by abrupt representation shifts near critical points of the IB trade-off parameter, beta. In this paper, I introduce a novel approach to achieve stable and convex IB optimization through symbolic continuation and entropy-regularized trajectories. I analytically prove convexity and uniqueness of the IB solution path when an entropy regularization term is included, and demonstrate how this stabilizes representation learning across a wide range of eta values. Additionally, I provide extensive sensitivity analyses around critical points (beta) with statistically robust uncertainty quantification (95% confidence intervals). The open-source implementation, experimental results, and reproducibility framework included in this work offer a clear path for practical deployment and future extension of my proposed method.

Additive quantization enables extreme LLM compression with O(1) lookup-table dequantization, making it attractive for edge deployment. Yet at 2-bit precision, it often fails catastrophically, even with extensive search and finetuning. We show that the dominant bottleneck is codebook initialisation. Greedy sequential initialisation frequently places the model in poor optimisation regions that subsequent beam search and PV-tuning struggle to overcome. We analyse this behaviour through the representational ratio ho = N/KM, which characterises the relationship between weight groups and codebook capacity, and propose OA-EM, an output-aware EM initialisation method using Hessian-weighted Mahalanobis distance. Across compression rates, search budgets, and three architectures (Llama 3.2 3B, Llama 3.1 8B, Qwen 2.5 3B), OA-EM consistently produces better solutions after PV-tuning and dominates the quality-compute frontier. The severity of the bottleneck scales with ho: moderate at 3 bpp but extreme at 2 bpp, where poor initialisation can degrade perplexity by orders of magnitude. More broadly, our results highlight the importance of optimisation geometry in compressed model spaces, where initialisation can dominate subsequent search and fine-tuning.

Training billion-parameter models requires distributing model states across GPUs using fully sharded data parallel (i.e., ZeRO-3). While ZeRO-3 succeeds on clusters with high-bandwidth NVLink and InfiniBand interconnects, researchers with commodity hardware face severe inter-node all-gather bottlenecks. Existing optimizations take two approaches: GPU memory caching (MiCS, ZeRO++) trades memory capacity for reduced communication, triggering out-of-memory failures on large models; host memory offloading (ZeRO-Offload, ZeRO-Infinity) extends capacity but degrades throughput due to PCIe overhead. We observe that on bandwidth-limited clusters, host memory can serve not as an overflow tier but as a fast caching layer that outperforms inter-node communication. Based on this insight, we propose FCDP, which eliminates redundant inter-node communication while preserving ZeRO-3's minimal GPU memory footprint. FCDP caches forward-pass parameters in host memory and reuses them during the backward pass via fast intra-node all-gather, reducing inter-node all-gather by 50%. For parameter-efficient fine-tuning (PEFT), FCDP selectively communicates only trainable parameters to maximize caching, reducing inter-node traffic by over 99%. In our commodity cluster setup, FCDP achieves up to 100x higher throughput than ZeRO-3 and 51x higher than ZeRO++, while maintaining ZeRO-3's maximum batch size.

Deep neural network (DNN) inference has become an important part of many data-center workloads. This has prompted focused efforts to design ever-faster deep learning accelerators such as GPUs and TPUs. However, an end-to-end DNN-based vision application contains more than just DNN inference, including input decompression, resizing, sampling, normalization, and data transfer. In this paper, we perform a thorough evaluation of computer vision inference requests performed on a throughput-optimized serving system. We quantify the performance impact of server overheads such as data movement, preprocessing, and message brokers between two DNNs producing outputs at different rates. Our empirical analysis encompasses many computer vision tasks including image classification, segmentation, detection, depth-estimation, and more complex processing pipelines with multiple DNNs. Our results consistently demonstrate that end-to-end application performance can easily be dominated by data processing and data movement functions (up to 56% of end-to-end latency in a medium-sized image, and sim 80% impact on system throughput in a large image), even though these functions have been conventionally overlooked in deep learning system design. Our work identifies important performance bottlenecks in different application scenarios, achieves 2.25times better throughput compared to prior work, and paves the way for more holistic deep learning system design.

Large-scale medical imaging datasets have accelerated development of artificial intelligence tools for clinical decision support. However, the large size of these datasets is a bottleneck for users with limited storage and bandwidth. Many users may not even require such large datasets as AI models are often trained on lower resolution images. If users could directly download at their desired resolution, storage and bandwidth requirements would significantly decrease. However, it is impossible to anticipate every users' requirements and impractical to store the data at multiple resolutions. What if we could store images at a single resolution but send them at different ones? We propose MIST, an open-source framework to operationalize progressive resolution for streaming medical images at multiple resolutions from a single high-resolution copy. We demonstrate that MIST can dramatically reduce imaging infrastructure inefficiencies for hosting and streaming medical images by >90%, while maintaining diagnostic quality for deep learning applications.

The Information Bottleneck (IB) principle has emerged as a promising approach for enhancing the generalization, robustness, and interpretability of deep neural networks, demonstrating efficacy across image segmentation, document clustering, and semantic communication. Among IB implementations, the IB Lagrangian method, employing Lagrangian multipliers, is widely adopted. While numerous methods for the optimizations of IB Lagrangian based on variational bounds and neural estimators are feasible, their performance is highly dependent on the quality of their design, which is inherently prone to errors. To address this limitation, we introduce Structured IB, a framework for investigating potential structured features. By incorporating auxiliary encoders to extract missing informative features, we generate more informative representations. Our experiments demonstrate superior prediction accuracy and task-relevant information preservation compared to the original IB Lagrangian method, even with reduced network size.

Although mission-critical applications require the use of deep neural networks (DNNs), their continuous execution at mobile devices results in a significant increase in energy consumption. While edge offloading can decrease energy consumption, erratic patterns in channel quality, network and edge server load can lead to severe disruption of the system's key operations. An alternative approach, called split computing, generates compressed representations within the model (called "bottlenecks"), to reduce bandwidth usage and energy consumption. Prior work has proposed approaches that introduce additional layers, to the detriment of energy consumption and latency. For this reason, we propose a new framework called BottleFit, which, in addition to targeted DNN architecture modifications, includes a novel training strategy to achieve high accuracy even with strong compression rates. We apply BottleFit on cutting-edge DNN models in image classification, and show that BottleFit achieves 77.1% data compression with up to 0.6% accuracy loss on ImageNet dataset, while state of the art such as SPINN loses up to 6% in accuracy. We experimentally measure the power consumption and latency of an image classification application running on an NVIDIA Jetson Nano board (GPU-based) and a Raspberry PI board (GPU-less). We show that BottleFit decreases power consumption and latency respectively by up to 49% and 89% with respect to (w.r.t.) local computing and by 37% and 55% w.r.t. edge offloading. We also compare BottleFit with state-of-the-art autoencoders-based approaches, and show that (i) BottleFit reduces power consumption and execution time respectively by up to 54% and 44% on the Jetson and 40% and 62% on Raspberry PI; (ii) the size of the head model executed on the mobile device is 83 times smaller. We publish the code repository for reproducibility of the results in this study.

Cloud platforms are increasingly relied upon to host diverse, resource-intensive workloads due to their scalability, flexibility, and cost-efficiency. In multi-tenant cloud environments, virtual machines are consolidated on shared physical servers to improve resource utilization. While virtualization guarantees resource partitioning for CPU, memory, and storage, it cannot ensure performance isolation. Competition for shared resources such as last-level cache, memory bandwidth, and network interfaces often leads to severe performance degradation. Existing management techniques, including VM scheduling and resource provisioning, require accurate performance prediction to mitigate interference. However, this remains challenging in public clouds due to the black-box nature of VMs and the highly dynamic nature of workloads. To address these limitations, we propose CloudFormer, a dual-branch Transformer-based model designed to predict VM performance degradation in black-box environments. CloudFormer jointly models temporal dynamics and system-level interactions, leveraging 206 system metrics at one-second resolution across both static and dynamic scenarios. This design enables the model to capture transient interference effects and adapt to varying workload conditions without scenario-specific tuning. Complementing the methodology, we provide a fine-grained dataset that significantly expands the temporal resolution and metric diversity compared to existing benchmarks. Experimental results demonstrate that CloudFormer consistently outperforms state-of-the-art baselines across multiple evaluation metrics, achieving robust generalization across diverse and previously unseen workloads. Notably, CloudFormer attains a mean absolute error (MAE) of just 7.8%, representing a substantial improvement in predictive accuracy and outperforming existing methods at least by 28%.

High-speed packet processing on multicore CPUs places extreme demands on memory allocators. In systems like DPDK, fixed-size memory pools back packet buffers (mbufs) to avoid costly dynamic allocation. However, even DPDK's optimized mempool faces scalability limits: lock contention on the shared ring, cache-coherence ping-pong between cores, and heavy TLB pressure from thousands of small pages. To mitigate these issues, DPDK typically uses explicit huge pages (2 MB or 1 GB) for its memory pools. This reduces TLB misses but requires manual configuration and can lead to fragmentation and inflexibility. We propose TurboMem, a novel C++ template-based memory pool that addresses these challenges. TurboMem combines a fully lock-free design (using atomic stacks and per-core local caches) with Transparent Huge Page (THP) auto merging. By automatically promoting pools to 2 MB pages via madvise(MADV_HUGEPAGE), TurboMem achieves the benefits of huge pages without manual setup. We also enforce strict NUMA locality and CPU affinity, so each core allocates and frees objects from its local node. Using Intel VTune on a single-socket 100 Gbps testbed, we show that TurboMem boosts packet throughput by up to 28% while reducing TLB misses by 41% compared to a standard DPDK mempool with explicit huge pages. These results demonstrate that THP auto-merging can outperform manually reserved huge pages in low-fragmentation scenarios, and that modern C++ lock-free programming yields practical gains in data-plane software. Note: The performance claims reported in this preliminary version (up to 28% higher throughput and 41% fewer TLB misses) are based on mock benchmarks. Comprehensive real-system evaluations using Intel VTune are currently underway and will be presented in a future revision.

Cross-device Federated Learning (FL) is a distributed learning paradigm with several challenges that differentiate it from traditional distributed learning, variability in the system characteristics on each device, and millions of clients coordinating with a central server being primary ones. Most FL systems described in the literature are synchronous - they perform a synchronized aggregation of model updates from individual clients. Scaling synchronous FL is challenging since increasing the number of clients training in parallel leads to diminishing returns in training speed, analogous to large-batch training. Moreover, stragglers hinder synchronous FL training. In this work, we outline a production asynchronous FL system design. Our work tackles the aforementioned issues, sketches of some of the system design challenges and their solutions, and touches upon principles that emerged from building a production FL system for millions of clients. Empirically, we demonstrate that asynchronous FL converges faster than synchronous FL when training across nearly one hundred million devices. In particular, in high concurrency settings, asynchronous FL is 5x faster and has nearly 8x less communication overhead than synchronous FL.

Data preprocessing pipelines, which includes data decoding, cleaning, and transforming, are a crucial component of Machine Learning (ML) training. Thy are computationally intensive and often become a major bottleneck, due to the increasing performance gap between the CPUs used for preprocessing and the GPUs used for model training. Recent studies show that a significant number of CPUs across several machines are required to achieve sufficient throughput to saturate the GPUs, leading to increased resource and energy consumption. When the pipeline involves vocabulary generation, the preprocessing performance scales poorly due to significant row-wise synchronization overhead between different CPU cores and servers. To address this limitation, in this paper we present the design of Piper, a hardware accelerator for tabular data preprocessing, prototype it on FPGAs, and demonstrate its potential for training pipelines of commercial recommender systems. Piper achieves 4.7 sim 71.3times speedup in latency over a 128-core CPU server and outperforms a data-center GPU by 4.8sim 20.3times when using binary input. The impressive performance showcases Piper's potential to increase the efficiency of data preprocessing pipelines and significantly reduce their resource consumption.

Attention efficiency is critical to large language model (LLM) inference. While prior advances optimize attention execution for individual requests (e.g., FlashAttention), production LLM serving relies on batching requests with highly heterogeneous sequence lengths for high serving throughput. This mismatch induces severe computation and I/O imbalance, exacerbates stragglers, and underutilizes GPU resources. We present PackInfer, a kernel-level attention framework that enables compute- and I/O-aware execution for heterogeneous batched inference. PackInfer orchestrates batched requests into load-balanced execution groups, effectively saturating GPU utilization by packing multiple requests into unified kernel launches. By constructing attention kernels directly over packed query-key regions, PackInfer eliminates redundant computation and balances thread-block execution. It then incorporates I/O-aware grouping that co-locates shared-prefix requests and reorganizes KV caches into group-contiguous layouts, reducing memory fragmentation and redundant data movement as generation evolves. Evaluations on real-world workloads show that PackInfer reduces inference latency by 13.0-20.1%, and improves throughput by 20% compared to the state-of-the-art FlashAttention.

Extensive system scales (i.e. thousands of GPU/TPUs) and prolonged training periods (i.e. months of pretraining) significantly escalate the probability of failures when training large language models (LLMs). Thus, efficient and reliable fault-tolerance methods are in urgent need. Checkpointing is the primary fault-tolerance method to periodically save parameter snapshots from GPU memory to disks via CPU memory. In this paper, we identify the frequency of existing checkpoint-based fault-tolerance being significantly limited by the storage I/O overheads, which results in hefty re-training costs on restarting from the nearest checkpoint. In response to this gap, we introduce an in-memory fault-tolerance framework for large-scale LLM pretraining. The framework boosts the efficiency and reliability of fault tolerance from three aspects: (1) Reduced Data Transfer and I/O: By asynchronously caching parameters, i.e., sharded model parameters, optimizer states, and RNG states, to CPU volatile memory, Our framework significantly reduces communication costs and bypasses checkpoint I/O. (2) Enhanced System Reliability: Our framework enhances parameter protection with a two-layer hierarchy: snapshot management processes (SMPs) safeguard against software failures, together with Erasure Coding (EC) protecting against node failures. This double-layered protection greatly improves the survival probability of the parameters compared to existing checkpointing methods. (3) Improved Snapshotting Frequency: Our framework achieves more frequent snapshotting compared with asynchronous checkpointing optimizations under the same saving time budget, which improves the fault tolerance efficiency. Empirical results demonstrate that Our framework minimizes the overhead of fault tolerance of LLM pretraining by effectively leveraging redundant CPU resources.

Owing to the huge success of generative artificial intelligence (AI), large language models (LLMs) have emerged as a core subclass, underpinning applications such as question answering, text generation, and code completion. While fine-tuning these models on domain-specific data can yield significant performance gains, it also poses daunting computational challenges, especially for researchers and small organizations with limited hardware resources. Although SSD offloading (i.e., ZeRO-Infinity) has emerged as a viable strategy to overcome the GPU memory barrier via leveraging both system memory (i.e., CPU DRAM) and storage space (i.e., solid-state devices, SSDs), its design primarily targets model-centric performance issues. As a result, key system-level issues, including system memory fragmentation, inefficient pinned buffer allocation, peak CPU usage spikes, and file system overhead, remain unaddressed, stifling scalability and inflating costs. Such an observation motivates this paper to introduce MemAscend, a framework that systematically tackles the underexplored system memory bottlenecks in SSD-offloaded LLM training, with a focus on resource-constrained environments. By streamlining pinned-memory allocation, eradicating fragmentation, and mitigating peak overhead, MemAscend reclaims a substantial system memory budget, enabling larger models, longer context windows, and higher batch sizes without exceeding modest hardware limits. Across diverse LLM benchmarks, MemAscend reduces peak system-memory consumption by an average of 55.7% compared with standard SSD offloading techniques, lowering the hardware barrier for fine-tuning and unlocking new possibilities for cost-effective large-scale training on limited-resource machines.

We revisit the I/O complexity of attention in large language models. Given query-key-value matrices Q,K,VinR^{ntimes d}, and a machine with fast memory size M, the goal is to compute the "attention matrix" A=softmax(Q K ^{top}/d) V with the minimal number of data transfers between fast and slow memory. Existing methods in the literature, most notably FlashAttention and its variants, incur an I/O cost that depends quadratically on n, while a trivial lower bound only requires Ω(nd) I/O's to read the inputs and write the output. In this work, we present a technique for computing attention where the I/O cost only depends almost-linearly on n in most parameter regimes. This is achieved by developing I/O-efficient algorithms inspired by the recent approximate attention framework of Alman and Song. We also prove corresponding lower bounds in each parameter regime to show that our algorithms are indeed close to I/O-optimal.

Production-grade LLM systems require robust adherence to dozens or even hundreds of instructions simultaneously. However, the instruction-following capabilities of LLMs at high instruction densities have not yet been characterized, as existing benchmarks only evaluate models on tasks with a single or few instructions. We introduce IFScale, a simple benchmark of 500 keyword-inclusion instructions for a business report writing task to measure how instruction-following performance degrades as instruction density increases. We evaluate 20 state-of-the-art models across seven major providers and find that even the best frontier models only achieve 68% accuracy at the max density of 500 instructions. Our analysis reveals model size and reasoning capability to correlate with 3 distinct performance degradation patterns, bias towards earlier instructions, and distinct categories of instruction-following errors. Our insights can help inform design of instruction-dense prompts in real-world applications and highlight important performance-latency tradeoffs. We open-source the benchmark and all results for further analysis at https://distylai.github.io/IFScale.

A variety of Auto-Regressive Video Diffusion Models (ARVDM) have achieved remarkable successes in generating realistic long-form videos. However, theoretical analyses of these models remain scant. In this work, we develop theoretical underpinnings for these models and use our insights to improve the performance of existing models. We first develop Meta-ARVDM, a unified framework of ARVDMs that subsumes most existing methods. Using Meta-ARVDM, we analyze the KL-divergence between the videos generated by Meta-ARVDM and the true videos. Our analysis uncovers two important phenomena inherent to ARVDM -- error accumulation and memory bottleneck. By deriving an information-theoretic impossibility result, we show that the memory bottleneck phenomenon cannot be avoided. To mitigate the memory bottleneck, we design various network structures to explicitly use more past frames. We also achieve a significantly improved trade-off between the mitigation of the memory bottleneck and the inference efficiency by compressing the frames. Experimental results on DMLab and Minecraft validate the efficacy of our methods. Our experiments also demonstrate a Pareto-frontier between the error accumulation and memory bottleneck across different methods.

Lossless data compression remains central to computer science, with direct impact on storage, communication bandwidth, computational cost, and energy consumption. It is also closely related to Algorithmic Information Theory, where compressibility provides an operational measure of structure and non-randomness. This paper presents the 2026 Algorithmic Information Theory Data Compression Challenge, a benchmark for evaluating general-purpose lossless compressors under realistic constraints. Submissions were encouraged to use arithmetic or range coding, limited to at most 8 GB of memory, and required to include a decompressor no larger than 1 MB. The benchmark comprised sixteen heterogeneous files, split into public training and hidden testing datasets. In total, 117 valid submitted compressors were evaluated alongside established reference compressors using compression ratio, compression and decompression time, Weissman score, and Pareto-frontier analysis. The results show that performance depends strongly on the optimization criterion: fast compressors achieved the best speed-oriented scores, whereas modelling-intensive compressors produced smaller outputs at higher computational cost. A Normalized Compression Distance analysis further revealed clusters of related submissions and distinguished incremental variants from more independent implementations. Selected submissions were described for their methodological novelty or competitive performance and further tested on four large external datasets, where several achieved competitive or superior results relative to established compressors. Overall, the challenge confirms the importance of probabilistic modelling, hidden testing, and external datasets for assessing compression performance and generalization. Benchmark resources, leaderboard data, binaries, and selected source code are publicly available at https://aitdcc.github.io.

Large Language Model (LLM) serving systems remain fundamentally fragile, where frequent hardware faults in hyperscale clusters trigger disproportionate service outages in the software stack. Current recovery mechanisms are prohibitively slow, often requiring up to 10 minutes to reinitialize resources and reload massive model weights. We introduce KevlarFlow, a fault tolerant serving architecture designed to bridge the gap between hardware unreliability and service availability. KevlarFlow leverages 1) decoupled model parallelism initialization, 2) dynamic traffic rerouting, and 3) background KV cache replication to maintain high throughput during partial failures. Our evaluation demonstrates that KevlarFlow reduces mean-time-to-recovery (MTTR) by 20x and, under failure conditions, improves average latency by 3.1x, 99th percentile (p99) latency by 2.8x, average time-to-first-token (TTFT) by 378.9x, and p99 TTFT by 574.6x with negligible runtime overhead in comparison to state-of-the-art LLM serving systems.

We rethink test-time scaling laws from a practical efficiency perspective, revealing that the effectiveness of smaller models is significantly overestimated. Prior work, grounded in compute-optimality, overlooks critical memory access bottlenecks introduced by inference-time strategies (e.g., Best-of-N, long CoTs). Our holistic analysis, spanning models from 0.6B to 32B parameters, reveals a new Kinetics Scaling Law that better guides resource allocation by incorporating both computation and memory access costs. Kinetics Scaling Law suggests that test-time compute is more effective when used on models above a threshold than smaller ones. A key reason is that in TTS, attention, rather than parameter count, emerges as the dominant cost factor. Motivated by this, we propose a new scaling paradigm centered on sparse attention, which lowers per-token cost and enables longer generations and more parallel samples within the same resource budget. Empirically, we show that sparse attention models consistently outperform dense counterparts, achieving over 60 points gains in low-cost regimes and over 5 points gains in high-cost regimes for problem-solving accuracy on AIME, encompassing evaluations on state-of-the-art MoEs. These results suggest that sparse attention is essential for realizing the full potential of test-time scaling because, unlike training, where parameter scaling saturates, test-time accuracy continues to improve through increased generation. The code is available at https://github.com/Infini-AI-Lab/Kinetics.

We present a cross-architecture evaluation of production LLM inference on AMD Instinct MI325X GPUs, benchmarking four models spanning 235B to 1 trillion parameters across three architectural families (MoE+MLA, Dense+GQA, MoE+GQA) on an 8-GPU cluster with 2TB aggregate HBM3e using vLLM v0.14.1. Our results demonstrate that architecture-aware optimization is essential: MLA models require block size 1 and cannot use KV cache offloading, while GQA models benefit from both. The AMD AITER runtime is required for competitive MLA inference throughput and must be selectively disabled for architectures with incompatible attention head configurations. A controlled AITER ablation on Llama-3.1-405B (n=5 per condition) reveals a modest 3-5% throughput benefit at high concurrency but 2-16x higher measurement variability, confirming that AITER's large speedups target MoE/MLA kernels specifically. Under text-only workloads, Llama-405B and DeepSeek V3.2 achieve comparable peak throughput (15,944 and 15,343 tok/s) despite an order-of-magnitude difference in active parameters. Under vision workloads, Qwen3-VL-235B reaches 47,873 tok/s, 6.5x higher than Kimi-K2.5 (7,327 tok/s). Active parameter count per token is associated with inference throughput, though confounded by differences in quantization, AITER acceleration, and tensor parallelism. All four models exhibit a common throughput saturation point consistent with a memory-bandwidth bottleneck (~500 concurrent for short sequences, ~100-200 for longer sequences). All models maintain 100% HTTP-level success rates through 1,000 concurrent users, processing 18.9 million tokens across 17,406 requests without failures.

The proliferation of cloud-native architectures, characterized by microservices and dynamic orchestration, has rendered modern IT infrastructures exceedingly complex and volatile. This complexity generates overwhelming volumes of operational data, leading to critical bottlenecks in conventional systems: inefficient information processing, poor task coordination, and loss of contextual continuity during fault diagnosis and remediation. To address these challenges, we propose AOI (AI-Oriented Operations), a novel multi-agent collaborative framework that integrates three specialized agents with an LLM-based Context Compressor. Its core innovations include: (1) a dynamic task scheduling strategy that adaptively prioritizes operations based on real-time system states, and (2) a three-layer memory architecture comprising Working, Episodic, and Semantic layers that optimizes context retention and retrieval. Extensive experiments on both synthetic and real-world benchmarks demonstrate that AOI effectively mitigates information overload, achieving a 72.4% context compression ratio while preserving 92.8% of critical information and significantly enhances operational efficiency, attaining a 94.2% task success rate and reducing the Mean Time to Repair (MTTR) by 34.4% compared to the best baseline. This work presents a paradigm shift towards scalable, adaptive, and context-aware autonomous operations, enabling robust management of next-generation IT infrastructures with minimal human intervention.

The widespread of Large Language Models (LLMs) marks a significant milestone in generative AI. Nevertheless, the increasing context length and batch size in offline LLM inference escalate the memory requirement of the key-value (KV) cache, which imposes a huge burden on the GPU VRAM, especially for resource-constraint scenarios (e.g., edge computing and personal devices). Several cost-effective solutions leverage host memory or SSDs to reduce storage costs for offline inference scenarios and improve the throughput. Nevertheless, they suffer from significant performance penalties imposed by intensive KV cache accesses due to limited PCIe bandwidth. To address these issues, we propose InstInfer, a novel LLM inference system that offloads the most performance-critical computation (i.e., attention in decoding phase) and data (i.e., KV cache) parts to Computational Storage Drives (CSDs), which minimize the enormous KV transfer overheads. InstInfer designs a dedicated flash-aware in-storage attention engine with KV cache management mechanisms to exploit the high internal bandwidths of CSDs instead of being limited by the PCIe bandwidth. The optimized P2P transmission between GPU and CSDs further reduces data migration overheads. Experimental results demonstrate that for a 13B model using an NVIDIA A6000 GPU, InstInfer improves throughput for long-sequence inference by up to 11.1times, compared to existing SSD-based solutions such as FlexGen.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

Large language model fine-tuning is bottlenecked by memory: a 7B parameter model requires 84GB--14GB for weights, 14GB for gradients, and 56GB for FP32 optimizer states--exceeding even A100-40GB capacity. We present Chronicals, an open-source training framework achieving 3.51x speedup over Unsloth through four synergistic optimizations: (1) fused Triton kernels eliminating 75% of memory traffic via RMSNorm (7x), SwiGLU (5x), and QK-RoPE (2.3x) fusion; (2) Cut Cross-Entropy reducing logit memory from 5GB to 135MB through online softmax computation; (3) LoRA+ with theoretically-derived 16x differential learning rates between adapter matrices; and (4) Best-Fit Decreasing sequence packing recovering 60-75% of compute wasted on padding. On Qwen2.5-0.5B with A100-40GB, Chronicals achieves 41,184 tokens/second for full fine-tuning versus Unsloth's 11,736 tokens/second (3.51x). For LoRA at rank 32, we reach 11,699 tokens/second versus Unsloth MAX's 2,857 tokens/second (4.10x). Critically, we discovered that Unsloth's reported 46,000 tokens/second benchmark exhibited zero gradient norms--the model was not training. We provide complete mathematical foundations: online softmax correctness proofs, FlashAttention IO complexity bounds O(N^2 d^2 M^{-1}), LoRA+ learning rate derivations from gradient magnitude analysis, and bin-packing approximation guarantees. All implementations, benchmarks, and proofs are available at https://github.com/Ajwebdevs/Chronicals with pip installation via https://pypi.org/project/chronicals/.

Vericoding refers to the generation of formally verified code from rigorous specifications. Recent AI models show promise in vericoding, but a unified methodology for cross-paradigm evaluation is lacking. Existing benchmarks test only individual languages/tools (e.g., Dafny, Verus, and Lean) and each covers very different tasks, so the performance numbers are not directly comparable. We address this gap with AlgoVeri, a benchmark that evaluates vericoding of 77 classical algorithms in Dafny, Verus, and Lean. By enforcing identical functional contracts, AlgoVeri reveals critical capability gaps in verification systems. While frontier models achieve tractable success in Dafny (40.3% for Gemini-3 Flash), where high-level abstractions and SMT automation simplify the workflow, performance collapses under the systems-level memory constraints of Verus (24.7%) and the explicit proof construction required by Lean (7.8%). Beyond aggregate metrics, we uncover a sharp divergence in test-time compute dynamics: Gemini-3 effectively utilizes iterative repair to boost performance (e.g., tripling pass rates in Dafny), whereas GPT-OSS saturates early. Finally, our error analysis shows that language design affects the refinement trajectory: while Dafny allows models to focus on logical correctness, Verus and Lean trap models in persistent syntactic and semantic barriers. All data and evaluation code can be found at https://github.com/haoyuzhao123/algoveri.

Large language models (LLMs) have surged in popularity and are extensively used in commercial applications, where the efficiency of model serving is crucial for the user experience. Most current research focuses on optimizing individual sub-procedures, e.g. local inference and communication, however, there is no comprehensive framework that provides a holistic system view for optimizing LLM serving in an end-to-end manner. In this work, we conduct a detailed analysis to identify major bottlenecks that impact end-to-end latency in LLM serving systems. Our analysis reveals that a comprehensive LLM serving endpoint must address a series of efficiency bottlenecks that extend beyond LLM inference. We then propose ScaleLLM, an optimized system for resource-efficient LLM serving. Our extensive experiments reveal that with 64 concurrent requests, ScaleLLM achieves a 4.3x speed up over vLLM and outperforms state-of-the-arts with 1.5x higher throughput.

In supervised learning, understanding an input's proximity to the training data can help a model decide whether it has sufficient evidence for reaching a reliable prediction. While powerful probabilistic models such as Gaussian Processes naturally have this property, deep neural networks often lack it. In this paper, we introduce Distance Aware Bottleneck (DAB), i.e., a new method for enriching deep neural networks with this property. Building on prior information bottleneck approaches, our method learns a codebook that stores a compressed representation of all inputs seen during training. The distance of a new example from this codebook can serve as an uncertainty estimate for the example. The resulting model is simple to train and provides deterministic uncertainty estimates by a single forward pass. Finally, our method achieves better out-of-distribution (OOD) detection and misclassification prediction than prior methods, including expensive ensemble methods, deep kernel Gaussian Processes, and approaches based on the standard information bottleneck.

Large-scale distributed training in production datacenters constitutes a challenging workload bottlenecked by network communication. In response, both major industry players (e.g., Ultra Ethernet Consortium) and parts of academia have surprisingly, and almost unanimously, agreed that packet spraying is necessary to improve the performance of large-scale distributed training workloads. In this paper, we challenge this prevailing belief and pose the question: How close can a singlepath transport approach an optimal multipath transport? We demonstrate that singlepath transport (from a NIC's perspective) is sufficient and can perform nearly as well as an ideal multipath transport with packet spraying, particularly in the context of distributed training in leaf-spine topologies. Our assertion is based on four key observations about workloads driven by collective communication patterns: (i) flows within a collective start almost simultaneously, (ii) flow sizes are nearly equal, (iii) the completion time of a collective is more crucial than individual flow completion times, and (iv) flows can be split upon arrival. We analytically prove that singlepath transport, using minimal flow splitting (at the application layer), is equivalent to an ideal multipath transport with packet spraying in terms of maximum congestion. Our preliminary evaluations support our claims. This paper suggests an alternative agenda for developing next-generation transport protocols tailored for large-scale distributed training.

Large language model (LLM) merging has become a key technique in modern LLM development pipelines, enabling the integration of multiple task- or domain-specific expert models without retraining. However, as the number of experts grows, existing merging implementations treat model parameters as unstructured files and execute merges in a stateless, one-shot manner, leading to excessive disk I/O, redundant parameter scans, and poor scalability. In this paper, we present MergePipe, a parameter management system for scalable LLM merging. MergePipe is the first system that treats LLM merging as a data management and execution problem, and introduces a catalog-driven abstraction over model parameters, merge plans, and execution lineage. At its core, MergePipe employs a cost-aware planner that explicitly models expert parameter I/O and enforces user-specified I/O budgets, followed by a streaming execution engine that materializes merged models under transactional guarantees. Our key insight is that while base model reads and output writes are unavoidable, expert parameter reads dominate merge cost and constitute the primary optimization target. By making expert access budget-aware throughout planning and execution, MergePipe mitigates the O(K) I/O growth of naive pipelines and achieves predictable scaling behavior. Experiments show that MergePipe reduces total I/O by up to an order of magnitude and delivers up to 11times end-to-end speedups (up to 90\% wall-time reduction) over state-of-the-art LLM merging pipelines.

The growing interest in artificial intelligence has created workloads that require both sequential and random access. At the same time, NVMe-backed storage solutions have emerged, providing caching capability for large columnar datasets in cloud storage. Current columnar storage libraries fall short of effectively utilizing an NVMe device's capabilities, especially when it comes to random access. Historically, this has been assumed an implicit weakness in columnar storage formats, but this has not been sufficiently explored. In this paper, we examine the effectiveness of popular columnar formats such as Apache Arrow, Apache Parquet, and Lance in both random access and full scan tasks against NVMe storage. We argue that effective encoding of a column's structure, such as the repetition and validity information, is the key to unlocking the disk's performance. We show that Parquet, when configured correctly, can achieve over 60x better random access performance than default settings. We also show that this high random access performance requires making minor trade-offs in scan performance and RAM utilization. We then describe the Lance structural encoding scheme, which alternates between two different structural encodings based on data width, and achieves better random access performance without making trade-offs in scan performance or RAM utilization.

Existing large language model (LLM) serving systems fall into two categories: 1) a unified system where prefill phase and decode phase are co-located on the same GPU, sharing the unified computational resource and storage, and 2) a disaggregated system where the two phases are disaggregated to different GPUs. The design of the disaggregated system addresses the latency interference and sophisticated scheduling issues in the unified system but leads to storage challenges including 1) replicated weights for both phases that prevent flexible deployment, 2) KV cache transfer overhead between the two phases, 3) storage imbalance that causes substantial wasted space of the GPU capacity, and 4) suboptimal resource adjustment arising from the difficulties in migrating KV cache. Such storage inefficiency delivers poor serving performance under high request rates. In this paper, we identify that the advantage of the disaggregated system lies in the disaggregated computation, i.e., partitioning the computational resource to enable the asynchronous computation of two phases. Thus, we propose a novel LLM serving system, semi-PD, characterized by disaggregated computation and unified storage. In semi-PD, we introduce a computation resource controller to achieve disaggregated computation at the streaming multi-processor (SM) level, and a unified memory manager to manage the asynchronous memory access from both phases. semi-PD has a low-overhead resource adjustment mechanism between the two phases, and a service-level objective (SLO) aware dynamic partitioning algorithm to optimize the SLO attainment. Compared to state-of-the-art systems, semi-PD maintains lower latency at higher request rates, reducing the average end-to-end latency per request by 1.27-2.58x on DeepSeek series models, and serves 1.55-1.72x more requests adhering to latency constraints on Llama series models.

Resource constraints increasingly determine what can be trained, fine-tuned, and deployed in large language models (LLMs), yet efficiency is often studied through isolated techniques rather than as an interacting system of limits. This survey adopts a constraint-centric perspective and organizes recent progress around three coupled bottlenecks: data efficiency (what to train on), memory efficiency (how to fit training), and compute budget awareness (when and where to spend FLOPs). On the data axis, we review selection and pruning methods that maximize learning per token, ranging from scalable proxy signals based on learning dynamics to gradient- and influence-based scoring, as well as difficulty-aware and curriculum-style strategies. We highlight emerging evidence that different notions of good data dominate in different regimes, implying that optimal subsets depend on the task objective and resource budget rather than being universal. On the systems side, we show that GPU memory, not raw compute, is often the dominant bottleneck in fine-tuning, and that effective scaling requires jointly reducing weight storage, optimizer states, and activation memory rather than optimizing any single component in isolation. Beyond memory, we frame training and inference as compute-governed processes in which optimization, data selection, and decoding must explicitly account for finite FLOP budgets. We review evidence for compute-optimal allocation and stopping rules, where computation should be halted or reallocated once marginal performance gains fall below a budget-dependent threshold. Together, these results unify compute-aware data selection, scaling laws, and adaptive inference under a common principle of resource-conditioned decision-making.

LLM agents increasingly rely on retrieval buffers to store and reuse past experience, yet the cache management policies governing these buffers remain largely ad-hoc. We formalize this as an online semantic cache replacement problem with switching costs, where items are matched by embedding similarity and hit quality is continuous rather than binary. Through experiments on two datasets from MemoryBench-Full (LoCoMo, DialSim) with 8 replacement policies, we reveal a surprising finding: classic heuristics (LRU, LFU) consistently underperform the naive FIFO baseline on semantic workloads, due to the absence of temporal locality and frequency concentration. We propose SOLAR, a learning-augmented framework that derives modification timing from regret accumulation (achieving sim17\% modification rate) and content selection from Bayesian online learning over implicit retrieval feedback. We prove SOLAR achieves a constant competitive ratio leq 3, independent of cache size and horizon (vs.\ Ω(K) for FIFO), and eviction regret O(KTlog T), matching the Ω(KT) lower bound up to logarithmic factors. Experiments demonstrate 5--75\% relative improvement over FIFO at tight cache sizes, with a clearly characterized phase transition at the working set boundary. Synthetic experiments with 5000-item pools further reveal an inverted-U relationship between pool size and retrieval quality, justifying capacity constraints as a retrieval noise phenomenon rather than a storage limitation.

Large Language Model (LLM) serving faces a fundamental tension between stringent latency Service Level Objectives (SLOs) and limited GPU memory capacity. When high request rates exhaust the KV cache budget, existing LLM inference systems often suffer severe head-of-line (HOL) blocking. While prior work explored PCIe-based offloading, these approaches cannot sustain responsiveness under high request rates, often failing to meet tight Time-To-First-Token (TTFT) and Time-Between-Tokens (TBT) SLOs. We present SuperInfer, a high-performance LLM inference system designed for emerging Superchips (e.g., NVIDIA GH200) with tightly coupled GPU-CPU architecture via NVLink-C2C. SuperInfer introduces RotaSched, the first proactive, SLO-aware rotary scheduler that rotates requests to maintain responsiveness on Superchips, and DuplexKV, an optimized rotation engine that enables full-duplex transfer over NVLink-C2C. Evaluations on GH200 using various models and datasets show that SuperInfer improves TTFT SLO attainment rates by up to 74.7% while maintaining comparable TBT and throughput compared to state-of-the-art systems, demonstrating that SLO-aware scheduling and memory co-design unlocks the full potential of Superchips for responsive LLM serving.

The most popular framework for distributed training of machine learning models is the (synchronous) parameter server (PS). This paradigm consists of n workers, which iteratively compute updates of the model parameters, and a stateful PS, which waits and aggregates all updates to generate a new estimate of model parameters and sends it back to the workers for a new iteration. Transient computation slowdowns or transmission delays can intolerably lengthen the time of each iteration. An efficient way to mitigate this problem is to let the PS wait only for the fastest n-b updates, before generating the new parameters. The slowest b workers are called backup workers. The optimal number b of backup workers depends on the cluster configuration and workload, but also (as we show in this paper) on the hyper-parameters of the learning algorithm and the current stage of the training. We propose DBW, an algorithm that dynamically decides the number of backup workers during the training process to maximize the convergence speed at each iteration. Our experiments show that DBW 1) removes the necessity to tune b by preliminary time-consuming experiments, and 2) makes the training up to a factor 3 faster than the optimal static configuration.

With the success of deep learning techniques in a broad range of application domains, many deep learning software frameworks have been developed and are being updated frequently to adapt to new hardware features and software libraries, which bring a big challenge for end users and system administrators. To address this problem, container techniques are widely used to simplify the deployment and management of deep learning software. However, it remains unknown whether container techniques bring any performance penalty to deep learning applications. The purpose of this work is to systematically evaluate the impact of docker container on the performance of deep learning applications. We first benchmark the performance of system components (IO, CPU and GPU) in a docker container and the host system and compare the results to see if there's any difference. According to our results, we find that computational intensive jobs, either running on CPU or GPU, have small overhead indicating docker containers can be applied to deep learning programs. Then we evaluate the performance of some popular deep learning tools deployed in a docker container and the host system. It turns out that the docker container will not cause noticeable drawbacks while running those deep learning tools. So encapsulating deep learning tool in a container is a feasible solution.

Columnar storage is a core component of a modern data analytics system. Although many database management systems (DBMSs) have proprietary storage formats, most provide extensive support to open-source storage formats such as Parquet and ORC to facilitate cross-platform data sharing. But these formats were developed over a decade ago, in the early 2010s, for the Hadoop ecosystem. Since then, both the hardware and workload landscapes have changed. In this paper, we revisit the most widely adopted open-source columnar storage formats (Parquet and ORC) with a deep dive into their internals. We designed a benchmark to stress-test the formats' performance and space efficiency under different workload configurations. From our comprehensive evaluation of Parquet and ORC, we identify design decisions advantageous with modern hardware and real-world data distributions. These include using dictionary encoding by default, favoring decoding speed over compression ratio for integer encoding algorithms, making block compression optional, and embedding finer-grained auxiliary data structures. We also point out the inefficiencies in the format designs when handling common machine learning workloads and using GPUs for decoding. Our analysis identified important considerations that may guide future formats to better fit modern technology trends.

Many computational factors limit broader deployment of large language models. In this paper, we focus on a memory bottleneck imposed by the key-value (KV) cache, a computational shortcut that requires storing previous KV pairs during decoding. While existing KV cache methods approach this problem by pruning or evicting large swaths of relatively less important KV pairs to dramatically reduce the memory footprint of the cache, they can have limited success in tasks that require recollecting a majority of previous tokens. To alleviate this issue, we propose LESS, a simple integration of a (nearly free) constant sized cache with eviction-based cache methods, such that all tokens can be queried at later decoding steps. Its ability to retain information throughout time shows merit on a variety of tasks where we demonstrate LESS can help reduce the performance gap from caching everything, sometimes even matching it, all while being efficient.

The growing prevalence of Large Language Models (LLMs) and their substantial memory requirements have prompted renewed interest in CPU offloading as a method to compensate for limited GPU memory. In particular, when CPU memory is leveraged to temporarily store intermediate states of LLMs, CPU memory becomes a new bottleneck and soon reaches the capacity limitation of commodity CPUs. In this work, we investigate the effectiveness of Compute Express Link (CXL) add-in card (AIC) memory as an extension to CPU memory, enabling larger model sizes and longer context lengths during fine-tuning. Through extensive benchmarking, this study quantifies the performance overhead introduced by transferring data between CXL memory, CPU, and GPUs, focusing on how concurrency and data volume influence bandwidth utilization and latency. This study also compares CPUbased optimizer steps when model parameters, gradients, and optimizer states reside in local memory versus CXL memory, revealing that naive adoption of CXL often degrades performance during the optimizer phase. To overcome these challenges, this study proposes a CXL-aware allocation to strategically partition CPU offloading workloads across both local and CXL memory. This study further demonstrates that employing multiple AICs significantly reduces bandwidth contention, thus improving scalability. Experimental results show that these optimizations enable efficient long-context LLM fine-tuning, underscoring CXL as a promising avenue for unlocking the full potential of CPU offloading in long-context LLM fine-tuning.

Large language models have been widely adopted across different tasks, but their auto-regressive generation nature often leads to inefficient resource utilization during inference. While batching is commonly used to increase throughput, performance gains plateau beyond a certain batch size, especially with smaller models, a phenomenon that existing literature typically explains as a shift to the compute-bound regime. In this paper, through an in-depth GPU-level analysis, we reveal that large-batch inference remains memory-bound, with most GPU compute capabilities underutilized due to DRAM bandwidth saturation as the primary bottleneck. To address this, we propose a Batching Configuration Advisor (BCA) that optimizes memory allocation, reducing GPU memory requirements with minimal impact on throughput. The freed memory and underutilized GPU compute capabilities can then be leveraged by concurrent workloads. Specifically, we use model replication to improve serving throughput and GPU utilization. Our findings challenge conventional assumptions about LLM inference, offering new insights and practical strategies for improving resource utilization, particularly for smaller language models.

The deployment of Large Language Models (LLMs) on edge devices is fundamentally constrained by the "Memory Wall" the bottleneck where data movement latency outstrips arithmetic throughput. Standard inference runtimes often incur significant overhead through high-level abstractions, dynamic dispatch, and unaligned memory access patterns. In this work, we present a novel "Virtual Tensor Core" architecture implemented in software, optimized specifically for ARM64 microarchitectures (Apple Silicon). By bypassing standard library containers in favor of direct memory mapping (mmap) and implementing hand-tuned NEON SIMD kernels, we achieve a form of "Software-Defined Direct Memory Access (DMA)." Our proposed Tensor Virtualization Layout (TVL) guarantees 100% cache line utilization for weight matrices, while our zero-copy loader eliminates initialization latency. Experimental results on a 110M parameter model demonstrate a stable throughput of >60 tokens/second on M2 hardware. While proprietary hardware accelerators (e.g., Apple AMX) can achieve higher peak throughput, our architecture provides a fully open, portable, and deterministic reference implementation for studying the memory bottleneck on general-purpose ARM silicon, meeting the 200ms psycholinguistic latency threshold without opaque dependencies.

Data-intensive applications, ranging from large-scale retrieval systems to advanced data pipelines, are increasingly bottlenecked by the processing of highly redundant text corpora. We present Merlin, a local-first, agnostic, high-throughput deduplication and context optimization engine designed to mitigate these inefficiencies. Utilizing a highly optimized, SIMD-friendly open-addressing flat hash set combined with xxHash3-64, Merlin performs rapid, byte-exact deduplication of text passages and data chunks. While broadly applicable to any text-processing workflow, its impact is particularly pronounced in Large Language Model (LLM) ecosystems, such as Retrieval-Augmented Generation (RAG). Our empirical evaluations demonstrate an input reduction ranging from 13.9% in low-redundancy datasets to over 71% in high-redundancy pipelines, maintaining absolute data fidelity. Furthermore, we detail the system's integration architecture via the Model Context Protocol (MCP), enabling secure, zero-network-interception deployment across major IDEs and autonomous agents. This paper outlines the core algorithmic design, performance benchmarks, and the architectural principles required to process data at sustained speeds of up to 8.7 GB/s.

Hyper-Connections (HC) expand the residual stream of Transformers into N parallel streams, providing a form of memory scaling beyond model width and depth. Manifold-Constrained HC (mHC) stabilizes this formulation at scale. The large gains from N{=}1 to N{=}4 suggest residual-stream expansion as a promising scaling axis. However, existing HC-family methods typically stop at N{=}4. Our experiments reveal why: scaling mHC beyond this point yields diminishing performance gains and rapidly increasing training cost. We attribute this limitation to two bottlenecks: insufficient write-back information for an expanding number of streams and residual-mixing generation whose cost scales cubically with N. To address both bottlenecks, we propose xHC (Expanded Hyper-Connections), the first HC-family method to achieve meaningful expansion beyond N{=}4. xHC combines temporal feature augmentation for richer write-back with a sparse residual-stream architecture that updates only k=4 of the N=16 streams while retaining dense access to the full residual state. Across 18B and 28B MoE models, xHC delivers strong and consistent downstream improvements. On an 18B MoE model, xHC improves the average downstream score by 4.0 points over mHC, while adding only modest training FLOPs over the vanilla baseline. Scaling-law experiments show that the vanilla and mHC require 1.50times and 1.19times the compute of xHC, respectively, to reach the same loss. Practical large-N training also requires controlling memory traffic from the expanded residual state. We therefore introduce xHC-Flash, which reduces the per-sublayer memory traffic from 73.5C to 40C, comparable to the 34C required by mHC at N{=}4, while retaining the gains of full xHC. Together, xHC and xHC-Flash make large-N residual-stream expansion effective and practical for LLM pre-training.

Serving systems for Large Language Models (LLMs) are often optimized to improve quality of service (QoS) and throughput. However, due to the lack of open-source LLM serving workloads, these systems are frequently evaluated under unrealistic workload assumptions. Consequently, performance may degrade when systems are deployed in real-world scenarios. This work presents BurstGPT, an LLM serving workload with 10.31 million traces from regional Azure OpenAI GPT services over 213 days. BurstGPT captures LLM serving characteristics from user, model and system perspectives: (1) User request concurrency: burstiness variations of requests in Azure OpenAI GPT services, revealing diversified concurrency patterns in different services and model types. (2) User conversation patterns: counts and intervals within conversations for service optimizations. (3) Model response lengths: auto-regressive serving processes of GPT models, showing statistical relations between requests and their responses. (4) System response failures: failures of conversation and API services, showing intensive resource needs and limited availability of LLM services in Azure. The details of the characteristics can serve multiple purposes in LLM serving optimizations, such as system evaluation and trace provisioning. In our demo evaluation with BurstGPT, frequent variations in BurstGPT reveal declines in efficiency, stability, or reliability in realistic LLM serving. We identify that the generalization of KV cache management, scheduling and disaggregation optimizations can be improved under realistic workload evaluations. BurstGPT is publicly available now at https://github.com/HPMLL/BurstGPT and is widely used to develop prototypes of LLM serving frameworks in the industry.

The information bottleneck (IB) approach is popular to improve the generalization, robustness and explainability of deep neural networks. Essentially, it aims to find a minimum sufficient representation t by striking a trade-off between a compression term I(x;t) and a prediction term I(y;t), where I(cdot;cdot) refers to the mutual information (MI). MI is for the IB for the most part expressed in terms of the Kullback-Leibler (KL) divergence, which in the regression case corresponds to prediction based on mean squared error (MSE) loss with Gaussian assumption and compression approximated by variational inference. In this paper, we study the IB principle for the regression problem and develop a new way to parameterize the IB with deep neural networks by exploiting favorable properties of the Cauchy-Schwarz (CS) divergence. By doing so, we move away from MSE-based regression and ease estimation by avoiding variational approximations or distributional assumptions. We investigate the improved generalization ability of our proposed CS-IB and demonstrate strong adversarial robustness guarantees. We demonstrate its superior performance on six real-world regression tasks over other popular deep IB approaches. We additionally observe that the solutions discovered by CS-IB always achieve the best trade-off between prediction accuracy and compression ratio in the information plane. The code is available at https://github.com/SJYuCNEL/Cauchy-Schwarz-Information-Bottleneck.

Serial LLM inference backends -- such as Ollama -- process requests one at a time under FCFS admission, causing Head-of-Line Blocking (HOLB) under mixed workloads at high utilisation: short factual queries can be delayed by minutes behind long generation jobs. While cloud-scale deployments mitigate HOLB via continuous batching (vLLM, Orca), these solutions require tens of GB of VRAM for concurrent KV-caches -- infeasible for memory-constrained edge and local deployments that rely on serial request dispatch. We present \clairvoyant, a drop-in sidecar proxy for any serial OpenAI-compatible backend (e.g., Ollama, llama.cpp). \clairvoyant predicts response length from 19 lightweight lexical features via an ONNX-exported XGBoost classifier, achieving 0.029\,ms per-request latency (four orders of magnitude below typical generation time). Because admission scheduling depends on relative ordering rather than exact prediction, the system optimises ranking fidelity, achieving 62--96\% in-distribution and 52--66\% cross-distribution accuracy across natural conversation datasets. We find that curated instruction datasets are degenerate training sources for length prediction: GPT-imposed brevity constraints reduce Long-class representation to under 0.02\% of examples, making natural conversation logs the only viable training source. End-to-end GPU benchmarks on an RTX~4090 show 70--76\% P50 latency reduction for short requests under maximum queue pressure (100 concurrent requests) and 17\% under steady-state Poisson arrivals (ρ=0.74). \clairvoyant is open-source and requires no modifications to the inference backend.

Mixture of Experts (MoEs) have become a central component of many state-of-the-art open-source and proprietary large language models. Despite their widespread adoption, it remains unclear how close existing MoE architectures are to optimal with respect to inference cost, as measured by accuracy per floating-point operation and per parameter. In this work, we revisit MoE design from a hardware-software co-design perspective, grounded in empirical and theoretical considerations. We characterize key performance bottlenecks across diverse deployment regimes, spanning offline high-throughput execution and online, latency-critical inference. Guided by these insights, we introduce LatentMoE, a new model architecture resulting from systematic design exploration and optimized for maximal accuracy per unit of compute. Empirical design space exploration at scales of up to 95B parameters and over a 1T-token training horizon, together with supporting theoretical analysis, shows that LatentMoE consistently outperforms standard MoE architectures in terms of accuracy per FLOP and per parameter. Given its strong performance, the LatentMoE architecture has been adopted by the flagship Nemotron-3 Super and Ultra models and scaled to substantially larger regimes, including longer token horizons and larger model sizes, as reported in Nvidia et al. (arXiv:2512.20856).

Fine-tuning large language models (LLMs) remains resource-intensive due to their sheer scale. While zeroth-order (ZO) optimization provides a memory-efficient alternative by eliminating backward passes, its application to multi-hundred-billion-parameter models is constrained by GPU memory and compute throughput. The ZO2 framework addresses the memory bottleneck by offloading model parameters to CPU memory and overlapping transformer block transfer with dual forward computation on a single GPU. However, ZO2 remains limited by its single-device execution and achieves modest throughput. In this work, we present DistZO2, a high-throughput, memory-efficient framework for distributed zeroth-order fine-tuning of LLMs. DistZO2 introduces three parallel strategies: (1) Perturbation Parallelism (PertP), which parallelizes the two perturbed forward passes across devices; (2) Distributed Data Parallelism (DDP), adapted to the scalar-gradient nature of ZO training; and (3) a unified 2D Parallelism design that combines PertP and DDP. To further mitigate communication bottlenecks introduced by parameter offloading, we propose a hardware-aware communication strategy that slices parameter blocks and redistributes them across GPUs via high-speed interconnects such as NVLink. DistZO2 scales zeroth-order fine-tuning to modern multi-GPU systems, preserving ZO2's memory efficiency while substantially improving training throughput. In our experiments on OPT-175B, DistZO2 achieves a 3x speedup over ZO2 with distributed computing. DistZO2's code has been open-sourced in https://github.com/liangyuwang/zo2.

Attention, as a core layer of the ubiquitous Transformer architecture, is the bottleneck for large language models and long-context applications. While FlashAttention-3 optimized attention for Hopper GPUs through asynchronous execution and warp specialization, it primarily targets the H100 architecture. The AI industry has rapidly transitioned to deploying Blackwell-based systems such as the B200 and GB200, which exhibit fundamentally different performance characteristics due to asymmetric hardware scaling: tensor core throughput doubles while other functional units (shared memory bandwidth, exponential units) scale more slowly or remain unchanged. We develop several techniques to address these shifting bottlenecks on Blackwell GPUs: (1) redesigned pipelines that exploit fully asynchronous MMA operations and larger tile sizes, (2) software-emulated exponential and conditional softmax rescaling that reduces non-matmul operations, and (3) leveraging tensor memory and the 2-CTA MMA mode to reduce shared memory traffic and atomic adds in the backward pass. We demonstrate that our method, FlashAttention-4, achieves up to 1.3times speedup over cuDNN 9.13 and 2.7times over Triton on B200 GPUs with BF16, reaching up to 1613 TFLOPs/s (71% utilization). Beyond algorithmic innovations, we implement FlashAttention-4 entirely in CuTe-DSL embedded in Python, achieving 20-30times faster compile times compared to traditional C++ template-based approaches while maintaining full expressivity.

DistServe improves the performance of large language models (LLMs) serving by disaggregating the prefill and decoding computation. Existing LLM serving systems colocate the two phases and batch the computation of prefill and decoding across all users and requests. We find that this strategy not only leads to strong prefill-decoding interferences but also couples the resource allocation and parallelism plans for both phases. LLM applications often emphasize individual latency for each phase: time to first token (TTFT) for the prefill phase and time per output token (TPOT) of each request for the decoding phase. In the presence of stringent latency requirements, existing systems have to prioritize one latency over the other, or over-provision compute resources to meet both. DistServe assigns prefill and decoding computation to different GPUs, hence eliminating prefill-decoding interferences. Given the application's TTFT and TPOT requirements, DistServe co-optimizes the resource allocation and parallelism strategy tailored for each phase. DistServe also places the two phases according to the serving cluster's bandwidth to minimize the communication caused by disaggregation. As a result, DistServe significantly improves LLM serving performance in terms of the maximum rate that can be served within both TTFT and TPOT constraints on each GPU. Our evaluations show that on various popular LLMs, applications, and latency requirements, DistServe can serve 4.48x more requests or 10.2x tighter SLO, compared to state-of-the-art systems, while staying within latency constraints for > 90% of requests.

Scaling Transformers to longer sequence lengths has been a major problem in the last several years, promising to improve performance in language modeling and high-resolution image understanding, as well as to unlock new applications in code, audio, and video generation. The attention layer is the main bottleneck in scaling to longer sequences, as its runtime and memory increase quadratically in the sequence length. FlashAttention exploits the asymmetric GPU memory hierarchy to bring significant memory saving (linear instead of quadratic) and runtime speedup (2-4times compared to optimized baselines), with no approximation. However, FlashAttention is still not nearly as fast as optimized matrix-multiply (GEMM) operations, reaching only 25-40\% of the theoretical maximum FLOPs/s. We observe that the inefficiency is due to suboptimal work partitioning between different thread blocks and warps on the GPU, causing either low-occupancy or unnecessary shared memory reads/writes. We propose FlashAttention-2, with better work partitioning to address these issues. In particular, we (1) tweak the algorithm to reduce the number of non-matmul FLOPs (2) parallelize the attention computation, even for a single head, across different thread blocks to increase occupancy, and (3) within each thread block, distribute the work between warps to reduce communication through shared memory. These yield around 2times speedup compared to FlashAttention, reaching 50-73\% of the theoretical maximum FLOPs/s on A100 and getting close to the efficiency of GEMM operations. We empirically validate that when used end-to-end to train GPT-style models, FlashAttention-2 reaches training speed of up to 225 TFLOPs/s per A100 GPU (72\% model FLOPs utilization).

W4A4 quantization promises full utilization of INT4 Tensor Cores, yet group dequantization overhead on CUDA Cores has driven existing systems to mixed-precision fallbacks. We present the first systematic study of how intra-SM compute balance governs this bottleneck. Through controlled benchmarks across four GPUs from Ampere and Ada architectures, we identify the Tensor Cores to CUDA Cores throughput ratio (ρ) as the primary hardware indicator: the W4A4-g128 kernel yields 2.0--2.5times speedup on RTX~3090 (ρ=16) yet degrades to 0.43--0.47times on A100 (ρ=64) in compute-bond scenarios, establishing W4A4 viability as platform-dependent rather than universally infeasible. Guided by this finding, we build APEX4, which co-designs pure INT4 GEMM kernels with ρ-aware granularity adaptation to mitigate the CUDA Cores dequantization bottleneck. APEX4 achieves perplexity within 0.63 of FP16 on LLaMA-2-70B and outperforms W4Ax Atom-g128 by 4.0\%--4.4\% in zero-shot accuracy. Deployed as a drop-in replacement in unmodified vLLM, it delivers up to 1.66times end-to-end speedup on L40S (ρ=8), and 1.78times on RTX~3090 (ρ=16), 2.09times on A40 (ρ=16), while recovering A100 (ρ=64) to 1.20--1.40times via the mixed-granularity mode. Our code is available at https://github.com/APEX4-W4A4/APEX4-W4A4.

Large language model (LLM)-based inference workloads increasingly dominate data center costs and resource utilization. Therefore, understanding the inference workload characteristics on evolving CPU-GPU coupled architectures is crucial for optimization. This paper presents an in-depth analysis of LLM inference behavior on loosely-coupled (PCIe A100/H100) and closely-coupled (GH200) systems. We analyze performance dynamics using fine-grained operator-to-kernel trace analysis, facilitated by our novel profiler SKIP and metrics like Total Kernel Launch and Queuing Time (TKLQT). Results show that closely-coupled (CC) GH200 significantly outperforms loosely-coupled (LC) systems at large batch sizes, achieving 1.9x-2.7x faster prefill latency for Llama 3.2-1B. However, our analysis also reveals that GH200 remains CPU-bound up to 4x larger batch sizes than LC systems. In this extended CPU-bound region, we identify the performance characteristics of the Grace CPU as a key factor contributing to higher inference latency at low batch sizes on GH200. We demonstrate that TKLQT accurately identifies this CPU/GPU-bound transition point. Based on this analysis, we further show that kernel fusion offers significant potential to mitigate GH200's low-batch latency bottleneck by reducing kernel launch overhead. This detailed kernel-level characterization provides critical insights for optimizing diverse CPU-GPU coupling strategies. This work is an initial effort, and we plan to explore other major AI/DL workloads that demand different degrees of CPU-GPU heterogeneous architectures.

Existing research has identified three structural performance bottlenecks in AI research agents: (1) synchronous single-GPU execution constrains sample throughput, limiting the benefit of search; (2) a generalization gap where validation-based selection causes performance to degrade over extended search horizons; and (3) the limited capability of fixed, single-turn LLM operators imposes a ceiling on search performance. We introduce AIRA_2, which addresses these bottlenecks through three architectural choices: an asynchronous multi-GPU worker pool that increases experiment throughput linearly; a Hidden Consistent Evaluation protocol that delivers a reliable evaluation signal; and ReAct agents that dynamically scope their actions and debug interactively. On MLE-bench-30, AIRA_2 achieves a mean Percentile Rank of 71.8% at 24 hours - surpassing the previous best of 69.9% - and steadily improves to 76.0% at 72 hours. Ablation studies reveal that each component is necessary and that the "overfitting" reported in prior work was driven by evaluation noise rather than true data memorization.

The emergence of Large Language Models (LLMs) has necessitated the adoption of parallel training techniques, involving the deployment of thousands of GPUs to train a single model. Unfortunately, we have found that the efficiency of current parallel training is often suboptimal, largely due to the following two main issues. Firstly, hardware failures are inevitable, leading to interruptions in the training tasks. The inability to quickly identify the faulty components results in a substantial waste of GPU resources. Secondly, since GPUs must wait for parameter synchronization to complete before proceeding to the next round of computation, network congestions can greatly increase the waiting time for GPUs. To address these challenges, this paper introduces a communication-driven solution, namely the C4. The key insights of C4 are two folds. First, in parallel training, collective communication exhibits periodic and homogeneous characteristics, so any anomalies are certainly due to some form of hardware malfunction. By leveraging this feature, C4 can rapidly identify the faulty components, swiftly isolate the anomaly, and restart the task, thereby avoiding resource wastage caused by delays in anomaly detection. Second, the predictable communication model of collective communication, involving few large flows, allows C4 to efficiently execute traffic planning, substantially reducing network congestion. C4 has been extensively implemented across our production systems, cutting error-induced overhead by roughly 30% and enhancing runtime performance by about 15% for certain applications with moderate communication costs.

AI agent inference is driving an inference heavy datacenter future and exposes bottlenecks beyond compute - especially memory capacity, memory bandwidth and high-speed interconnect. We introduce two metrics - Operational Intensity (OI) and Capacity Footprint (CF) - that jointly explain regimes the classic roofline analysis misses, including the memory capacity wall. Across agentic workflows (chat, coding, web use, computer use) and base model choices (GQA/MLA, MoE, quantization), OI/CF can shift dramatically, with long context KV cache making decode highly memory bound. These observations motivate disaggregated serving and system level heterogeneity: specialized prefill and decode accelerators, broader scale up networking, and decoupled compute-memory enabled by optical I/O. We further hypothesize agent-hardware co design, multiple inference accelerators within one system, and high bandwidth, large capacity memory disaggregation as foundations for adaptation to evolving OI/CF. Together, these directions chart a path to sustain efficiency and capability for large scale agentic AI inference.

Many deep learning models, developed in recent years, reach higher ImageNet accuracy than ResNet50, with fewer or comparable FLOPS count. While FLOPs are often seen as a proxy for network efficiency, when measuring actual GPU training and inference throughput, vanilla ResNet50 is usually significantly faster than its recent competitors, offering better throughput-accuracy trade-off. In this work, we introduce a series of architecture modifications that aim to boost neural networks' accuracy, while retaining their GPU training and inference efficiency. We first demonstrate and discuss the bottlenecks induced by FLOPs-optimizations. We then suggest alternative designs that better utilize GPU structure and assets. Finally, we introduce a new family of GPU-dedicated models, called TResNet, which achieve better accuracy and efficiency than previous ConvNets. Using a TResNet model, with similar GPU throughput to ResNet50, we reach 80.8 top-1 accuracy on ImageNet. Our TResNet models also transfer well and achieve state-of-the-art accuracy on competitive single-label classification datasets such as Stanford cars (96.0%), CIFAR-10 (99.0%), CIFAR-100 (91.5%) and Oxford-Flowers (99.1%). They also perform well on multi-label classification and object detection tasks. Implementation is available at: https://github.com/mrT23/TResNet.

Practical large language model (LLM) services may involve a long system prompt, which specifies the instructions, examples, and knowledge documents of the task and is reused across numerous requests. However, the long system prompt causes throughput/latency bottlenecks as the cost of generating the next token grows w.r.t. the sequence length. This paper aims to improve the efficiency of LLM services that involve long system prompts. Our key observation is that handling these system prompts requires heavily redundant memory accesses in existing causal attention computation algorithms. Specifically, for batched requests, the cached hidden states (i.e., key-value pairs) of system prompts are transferred from off-chip DRAM to on-chip SRAM multiple times, each corresponding to an individual request. To eliminate such a redundancy, we propose RelayAttention, an attention algorithm that allows reading these hidden states from DRAM exactly once for a batch of input tokens. RelayAttention is a free lunch: it maintains the generation quality while requiring no model retraining, as it is based on a mathematical reformulation of causal attention.

The rapid advancement of Large Language Models (LLMs) has driven the need for more efficient serving strategies. In this context, efficiency refers to the proportion of requests that meet their Service Level Objectives (SLOs), particularly for Time To First Token (TTFT) and Time Between Tokens (TBT). However, existing systems often prioritize one metric at the cost of the other. We present Ascendra, an LLM serving system designed to meet both TTFT and TBT SLOs simultaneously. The core insight behind Ascendra is that a request's urgency evolves as it approaches its deadline. To leverage this, Ascendra partitions GPU resources into two types of instances: low-priority and high-priority. Low-priority instances maximize throughput by processing requests out of arrival order, but at the risk of request starvation. To address this, Ascendra employs a performance model to predict requests at risk of missing their SLOs and proactively offloads them to high-priority instances. High-priority instances are optimized for low-latency execution and handle urgent requests nearing their deadlines. This partitioned architecture enables Ascendra to effectively balance high throughput and low latency. Extensive evaluation shows that Ascendra improves system throughput by up to 1.7x compared to vLLM and Sarathi-Serve while meeting both TTFT and TBT SLOs.

The mixture of experts (MoE) model is a sparse variant of large language models (LLMs), designed to hold a better balance between intelligent capability and computational overhead. Despite its benefits, MoE is still too expensive to deploy on resource-constrained edge devices, especially with the demands of on-device inference services. Recent research efforts often apply model compression techniques, such as quantization, pruning and merging, to restrict MoE complexity. Unfortunately, due to their predefined static model optimization strategies, they cannot always achieve the desired quality-overhead trade-off when handling multiple requests, finally degrading the on-device quality of service. These limitations motivate us to propose the D^2MoE, an algorithm-system co-design framework that matches diverse task requirements by dynamically allocating the most proper bit-width to each expert. Specifically, inspired by the nested structure of matryoshka dolls, we propose the matryoshka weight quantization (MWQ) to progressively compress expert weights in a bit-nested manner and reduce the required runtime memory. On top of it, we further optimize the I/O-computation pipeline and design a heuristic scheduling algorithm following our hottest-expert-bit-first (HEBF) principle, which maximizes the expert parallelism between I/O and computation queue under constrained memory budgets, thus significantly reducing the idle temporal bubbles waiting for the experts to load. Evaluations on real edge devices show that D^2MoE improves the overall inference throughput by up to 1.39times and reduces the peak memory footprint by up to 53% over the latest on-device inference frameworks, while still preserving comparable serving accuracy as its INT8 counterparts.

The rapid growth of Large Transformer-based models, specifically Large Language Models (LLMs), now scaling to trillions of parameters, has necessitated training across thousands of GPUs using complex hybrid parallelism strategies (e.g., data, tensor, and pipeline parallelism). Checkpointing this massive, distributed state is critical for a wide range of use cases, such as resilience, suspend-resume, investigating undesirable training trajectories, and explaining model evolution. However, existing checkpointing solutions typically treat model state as opaque binary blobs, ignoring the ``3D heterogeneity'' of the underlying data structures--varying by memory location (GPU vs. Host), number of ``logical'' objects sharded and split across multiple files, data types (tensors vs. Python objects), and their serialization requirements. This results in significant runtime overheads due to blocking device-to-host transfers, data-oblivious serialization, and storage I/O contention. In this paper, we introduce DataStates-LLM, a novel checkpointing architecture that leverages State Providers to decouple state abstraction from data movement. DataStates-LLM exploits the immutability of model parameters during the forward and backward passes to perform ``lazy'', non-blocking asynchronous snapshots. By introducing State Providers, we efficiently coalesce fragmented, heterogeneous shards and overlap the serialization of metadata with bulk tensor I/O. We evaluate DataStates-LLM on models up to 70B parameters on 256 A100-40GB GPUs. Our results demonstrate that DataStates-LLM achieves up to 4times higher checkpointing throughput and reduces end-to-end training time by up to 2.2times compared to state-of-the-art solutions, effectively mitigating the serialization and heterogeneity bottlenecks in extreme-scale LLM training.

The Key-Value (KV) cache in generative large language models (LLMs) introduces substantial memory overhead. Existing works mitigate this burden by offloading or compressing the KV cache. However, loading the entire cache incurs significant latency due to PCIe bandwidth bottlenecks in CPU-GPU communication, while aggressive compression causes notable performance degradation. We identify that certain layers in the LLM need to maintain global information and are unsuitable for selective loading. In contrast, other layers primarily focus on a few tokens with dominant activations that potentially incur substantial quantization error. This observation leads to a key insight that loading dominant tokens and quantizing all tokens can complement each other. Building on this insight, we propose a hybrid compression method, TailorKV, which seamlessly integrates quantization and offloading. TailorKV develops an inference framework along with a hardware-friendly implementation that leverages these complementary characteristics. Extensive long-context evaluations exhibit that TailorKV achieves nearly lossless performance under aggressive compression settings, outperforming the state-of-the-art. Particularly, the Llama-3.1-8B with 128k context can be served within a single RTX 3090 GPU, reaching 82 ms per token during decoding.

Recent advances in large language models have brought immense value to the world, with their superior capabilities stemming from the massive number of parameters they utilize. However, even the GPUs with the highest memory capacities, currently peaking at 80GB, are far from sufficient to accommodate these vast parameters and their associated optimizer states when conducting stochastic gradient descent-based optimization. One approach to hosting such huge models is to aggregate device memory from many GPUs. However, this approach introduces prohibitive costs for most academic researchers, who always have a limited budget for many high-end GPU servers. In this paper, we focus on huge model fine-tuning on a single, even low-end, GPU in a commodity server, which is accessible to most AI researchers. In such a scenario, the state-of-the-art work ZeRO-Infinity suffers from two severe issues when running in a commodity server: 1) low GPU utilization due to inefficient swapping, and 2) limited trainable model size due to CPU memory capacity. The underlying reason is that ZeRO-Infinity is optimized for running on high-end GPU servers. To this end, we present Fuyou, a low-cost training framework that enables efficient 100B huge model fine-tuning on a low-end server with a low-end GPU and limited CPU memory capacity. The key idea is to add the SSD-CPU communication as an optimization dimension and thus carefully co-optimize computation and data swapping from a systematic approach to maximize GPU utilization. The experimental results show that 1) Fuyou is able to fine-tune 175B GPT-3 on a consumer GPU RTX 4090 with high GPU utilization, while ZeRO-Infinity fails to fine-tune; and 2) when training a small GPT-3 13B model, Fuyou achieves 156 TFLOPS on an RTX 4090 GPU while ZeRO-Infinity only achieves 45 TFLOPS.

The Internet of Things is an example domain where data is perpetually generated in ever-increasing quantities, reflecting the proliferation of connected devices and the formation of continuous data streams over time. Consequently, the demand for ad-hoc, cost-effective machine learning solutions must adapt to this evolving data influx. This study tackles the task of offloading in small gateways, exacerbated by their dynamic availability over time. An approach leveraging CPU utilization metrics using online and continual machine learning techniques is proposed to predict gateway availability. These methods are compared to popular machine learning algorithms and a recent time-series foundation model, Lag-Llama, for fine-tuned and zero-shot setups. Their performance is benchmarked on a dataset of CPU utilization measurements over time from an IoT gateway and focuses on model metrics such as prediction errors, training and inference times, and memory consumption. Our primary objective is to study new efficient ways to predict CPU performance in IoT environments. Across various scenarios, our findings highlight that ensemble and online methods offer promising results for this task in terms of accuracy while maintaining a low resource footprint.

High throughput serving of large language models (LLMs) requires batching sufficiently many requests at a time. However, existing systems struggle because the key-value cache (KV cache) memory for each request is huge and grows and shrinks dynamically. When managed inefficiently, this memory can be significantly wasted by fragmentation and redundant duplication, limiting the batch size. To address this problem, we propose PagedAttention, an attention algorithm inspired by the classical virtual memory and paging techniques in operating systems. On top of it, we build vLLM, an LLM serving system that achieves (1) near-zero waste in KV cache memory and (2) flexible sharing of KV cache within and across requests to further reduce memory usage. Our evaluations show that vLLM improves the throughput of popular LLMs by 2-4times with the same level of latency compared to the state-of-the-art systems, such as FasterTransformer and Orca. The improvement is more pronounced with longer sequences, larger models, and more complex decoding algorithms. vLLM's source code is publicly available at https://github.com/vllm-project/vllm

Large language model (LLM) based agentic workflows have become a popular paradigm for coordinating multiple specialized agents to solve complex tasks. To improve serving efficiency, existing LLM systems employ prefix caching to reuse key-value (KV) tensors corresponding to agents' fixed prompts, thereby avoiding redundant computation across repeated invocations. However, current systems typically evict KV caches using a Least Recently Used (LRU) policy, which fails to anticipate future agent usage and often discards KV caches shortly before their reuse. This leads to frequent cache misses and substantial recomputation or swapping overhead. We present KVFlow, a workflow-aware KV cache management framework tailored for agentic workloads. KVFlow abstracts the agent execution schedule as an Agent Step Graph and assigns each agent a steps-to-execution value that estimates its temporal proximity to future activation. These values guide a fine-grained eviction policy at the KV node level, allowing KVFlow to preserve entries likely to be reused and efficiently manage shared prefixes in tree-structured caches. Moreover, KVFlow introduces a fully overlapped KV prefetching mechanism, which proactively loads required tensors from CPU to GPU in background threads for agents scheduled in the next step, thereby avoiding cache miss stalls during generation. Compared to SGLang with hierarchical radix cache, KVFlow achieves up to 1.83times speedup for single workflows with large prompts, and up to 2.19times speedup for scenarios with many concurrent workflows.

Network binarization emerges as one of the most promising compression approaches offering extraordinary computation and memory savings by minimizing the bit-width. However, recent research has shown that applying existing binarization algorithms to diverse tasks, architectures, and hardware in realistic scenarios is still not straightforward. Common challenges of binarization, such as accuracy degradation and efficiency limitation, suggest that its attributes are not fully understood. To close this gap, we present BiBench, a rigorously designed benchmark with in-depth analysis for network binarization. We first carefully scrutinize the requirements of binarization in the actual production and define evaluation tracks and metrics for a comprehensive and fair investigation. Then, we evaluate and analyze a series of milestone binarization algorithms that function at the operator level and with extensive influence. Our benchmark reveals that 1) the binarized operator has a crucial impact on the performance and deployability of binarized networks; 2) the accuracy of binarization varies significantly across different learning tasks and neural architectures; 3) binarization has demonstrated promising efficiency potential on edge devices despite the limited hardware support. The results and analysis also lead to a promising paradigm for accurate and efficient binarization. We believe that BiBench will contribute to the broader adoption of binarization and serve as a foundation for future research. The code for our BiBench is released https://github.com/htqin/BiBench .

With the increasing scale of models, the need for efficient distributed training has become increasingly urgent. Recently, many synchronous pipeline parallelism approaches have been proposed to improve training throughput. However, these approaches still suffer from two major issues, i.e., pipeline bubbles caused by periodic flushing and extra communication due to the increasing number of pipeline stages. To this end, we propose BitPipe, a bidirectional interleaved pipeline parallelism for accelerating large models training. Specifically, a hybrid scheme of fusing interleaved pipelines with bidirectional pipelines is proposed to reduce the computational time of each single micro-batch and multiply the number of devices executing simultaneously. A V-shaped schedule with eager gradient synchronization is introduced to reduce and overlap the communication between devices. Experiments conducted on up to 32 GPUs show that BitPipe improves the training throughput of GPT-style and BERT-style models by 1.05x-1.28x compared to the state-of-the-art synchronous approaches. The code of our implementation is available at https://github.com/wuhouming/BitPipe.

Memory-augmented LLM agents store and retrieve information from prior interactions, yet the relative importance of how memories are written versus how they are retrieved remains unclear. We introduce a diagnostic framework that analyzes how performance differences manifest across write strategies, retrieval methods, and memory utilization behavior, and apply it to a 3x3 study crossing three write strategies (raw chunks, Mem0-style fact extraction, MemGPT-style summarization) with three retrieval methods (cosine, BM25, hybrid reranking). On LoCoMo, retrieval method is the dominant factor: average accuracy spans 20 points across retrieval methods (57.1% to 77.2%) but only 3-8 points across write strategies. Raw chunked storage, which requires zero LLM calls, matches or outperforms expensive lossy alternatives, suggesting that current memory pipelines may discard useful context that downstream retrieval mechanisms fail to compensate for. Failure analysis shows that performance breakdowns most often manifest at the retrieval stage rather than at utilization. We argue that, under current retrieval practices, improving retrieval quality yields larger gains than increasing write-time sophistication. Code is publicly available at https://github.com/boqiny/memory-probe.

In large-scale reinforcement learning (RL) systems with decoupled Trainer-Rollout execution, the Trainer must regularly synchronize policy weights to the Rollout side to limit policy staleness. When inter-node bandwidth is abundant, such synchronization is usually only a small fraction of end-to-end cost. As model size grows, however, the communication demand rises rapidly. In bandwidth-constrained or network-variable deployments -- for example, cross-datacenter or cross-cluster settings, heterogeneous resource pools, and online RL -- weight synchronization can become a dominant bottleneck for throughput and tail latency. We observe that, in mainstream large-model RL training, the locations where parameters actually change are highly sparse at the element level (often 99%+ sparsity). Building on this observation, we propose and implement SparseRL-Sync, which replaces full-weight transfers with a lossless sparse update payload (indices and values) that can be exactly reconstructed on the inference side, thereby preserving 100% fidelity. Under a simplified cost model, sparse synchronization reduces the per-update communication volume from S to approximately S/X; with 99% sparsity (X ~ 100), this yields about a 100x reduction in transmitted data. Combined with appropriate bucketing, SparseRL-Sync also reduces launch and control-plane overhead, significantly improving scalability and end-to-end efficiency in bandwidth-limited and highly asynchronous RL settings.

Large Language Models (LLMs) represent a revolutionary advancement in the contemporary landscape of artificial general intelligence (AGI). As exemplified by ChatGPT, LLM-based applications necessitate minimal response latency and maximal throughput for inference serving. However, due to the unpredictability of LLM execution, the first-come-first-serve (FCFS) scheduling policy employed by current LLM serving systems suffers from head-of-line (HoL) blocking issues and long job response times. In this paper, we propose a new efficient LLM inference serving framework, named ALISE. The key design paradigm of ALISE is to leverage a novel speculative scheduler by estimating the execution time for each job and exploiting such prior knowledge to assign appropriate job priority orders, thus minimizing potential queuing delays for heterogeneous workloads. Furthermore, to mitigate the memory overhead of the intermediate key-value (KV) cache, we employ a priority-based adaptive memory management protocol and quantization-based compression techniques. Evaluations demonstrate that in comparison to the state-of-the-art solution vLLM, ALISE improves the throughput of inference serving by up to 1.8x and 2.1x under the same latency constraint on the Alpaca and ShareGPT datasets, respectively.

We present FFCV, a library for easy and fast machine learning model training. FFCV speeds up model training by eliminating (often subtle) data bottlenecks from the training process. In particular, we combine techniques such as an efficient file storage format, caching, data pre-loading, asynchronous data transfer, and just-in-time compilation to (a) make data loading and transfer significantly more efficient, ensuring that GPUs can reach full utilization; and (b) offload as much data processing as possible to the CPU asynchronously, freeing GPU cycles for training. Using FFCV, we train ResNet-18 and ResNet-50 on the ImageNet dataset with competitive tradeoff between accuracy and training time. For example, we are able to train an ImageNet ResNet-50 model to 75\% in only 20 mins on a single machine. We demonstrate FFCV's performance, ease-of-use, extensibility, and ability to adapt to resource constraints through several case studies. Detailed installation instructions, documentation, and Slack support channel are available at https://ffcv.io/ .

Large language models (LLMs) have revolutionized numerous applications, yet their deployment remains challenged by memory constraints on local devices. While scaling laws have enhanced LLM capabilities, the primary bottleneck has shifted from capability to availability, emphasizing the need for efficient memory management. Traditional compression methods, such as quantization, often require predefined compression ratios and separate compression processes for each setting, complicating deployment in variable memory environments. In this paper, we introduce BitStack, a novel, training-free weight compression approach that enables megabyte-level trade-offs between memory usage and model performance. By leveraging weight decomposition, BitStack can dynamically adjust the model size with minimal transmission between running memory and storage devices. Our approach iteratively decomposes weight matrices while considering the significance of each parameter, resulting in an approximately 1-bit per parameter residual block in each decomposition iteration. These blocks are sorted and stacked in storage as basic transmission units, with different quantities loaded based on current memory availability. Extensive experiments across a wide range of tasks demonstrate that, despite offering fine-grained size control, BitStack consistently matches or surpasses strong quantization baselines, particularly at extreme compression ratios. To the best of our knowledge, this is the first decomposition-based method that effectively bridges the gap to practical compression techniques like quantization. Code is available at https://github.com/xinghaow99/BitStack.

KV-cache memory is a major bottleneck in real-world LLM serving, where systems must simultaneously support latency-sensitive small-batch requests and high-throughput concurrent workloads. Although many KV-cache compression methods improve offline accuracy or compression ratio, they often violate practical serving constraints such as paged memory layouts, regular memory access, and fused attention execution, limiting their effectiveness in deployment. In this work, we identify the minimal set of 4-bit KV-cache quantization methods that remain viable under these constraints. Our central finding is that a simple design--token-wise INT4 quantization with block-diagonal Hadamard rotation--consistently achieves the best accuracy-efficiency trade-off. Across multiple models and benchmarks, this approach recovers nearly all of the accuracy lost by naive INT4, while more complex methods such as vector quantization and Hessian-aware quantization provide only marginal additional gains once serving compatibility is taken into account. To make this practical, we implement a fused rotation-quantization kernel that integrates directly into paged KV-cache layouts and introduces zero measurable end-to-end overhead, matching plain INT4 throughput across concurrency levels. Our results show that effective KV-cache compression is fundamentally a systems co-design problem: under real serving constraints, lightweight block-diagonal Hadamard rotation is a viable method that delivers near-lossless accuracy without sacrificing serving efficiency.

Recent innovation in large language models (LLMs), and their myriad use-cases have rapidly driven up the compute capacity demand for datacenter GPUs. Several cloud providers and other enterprises have made substantial plans of growth in their datacenters to support these new workloads. One of the key bottleneck resources in datacenters is power, and given the increasing model sizes of LLMs, they are becoming increasingly power intensive. In this paper, we show that there is a significant opportunity to oversubscribe power in LLM clusters. Power oversubscription improves the power efficiency of these datacenters, allowing more deployable servers per datacenter, and reduces the deployment time, since building new datacenters is slow. We extensively characterize the power consumption patterns of a variety of LLMs and their configurations. We identify the differences between the inference and training power consumption patterns. Based on our analysis of these LLMs, we claim that the average and peak power utilization in LLM clusters for inference should not be very high. Our deductions align with the data from production LLM clusters, revealing that inference workloads offer substantial headroom for power oversubscription. However, the stringent set of telemetry and controls that GPUs offer in a virtualized environment, makes it challenging to have a reliable and robust power oversubscription mechanism. We propose POLCA, our framework for power oversubscription that is robust, reliable, and readily deployable for GPU clusters. Using open-source models to replicate the power patterns observed in production, we simulate POLCA and demonstrate that we can deploy 30% more servers in the same GPU cluster for inference, with minimal performance loss

The growing demand for large language models (LLMs) requires serving systems to handle many concurrent requests with diverse service level objectives (SLOs). This exacerbates head-of-line (HoL) blocking during the compute-intensive prefill phase, where long-running requests monopolize resources and delay higher-priority ones, leading to widespread time-to-first-token (TTFT) SLO violations. While chunked prefill enables interruptibility, it introduces an inherent trade-off between responsiveness and throughput: reducing chunk size improves response latency but degrades computational efficiency, whereas increasing chunk size maximizes throughput but exacerbates blocking. This necessitates an adaptive preemption mechanism. However, dynamically balancing execution granularity against scheduling overheads remains a key challenge. In this paper, we propose FlowPrefill, a TTFT-goodput-optimized serving system that resolves this conflict by decoupling preemption granularity from scheduling frequency. To achieve adaptive prefill scheduling, FlowPrefill introduces two key innovations: 1) Operator-Level Preemption, which leverages operator boundaries to enable fine-grained execution interruption without the efficiency loss associated with fixed small chunking; and 2) Event-Driven Scheduling, which triggers scheduling decisions only upon request arrival or completion events, thereby supporting efficient preemption responsiveness while minimizing control-plane overhead. Evaluation on real-world production traces shows that FlowPrefill improves maximum goodput by up to 5.6times compared to state-of-the-art systems while satisfying heterogeneous SLOs.

Numerous deep learning algorithms have been inspired by and understood via the notion of information bottleneck, where unnecessary information is (often implicitly) minimized while task-relevant information is maximized. However, a rigorous argument for justifying why it is desirable to control information bottlenecks has been elusive. In this paper, we provide the first rigorous learning theory for justifying the benefit of information bottleneck in deep learning by mathematically relating information bottleneck to generalization errors. Our theory proves that controlling information bottleneck is one way to control generalization errors in deep learning, although it is not the only or necessary way. We investigate the merit of our new mathematical findings with experiments across a range of architectures and learning settings. In many cases, generalization errors are shown to correlate with the degree of information bottleneck: i.e., the amount of the unnecessary information at hidden layers. This paper provides a theoretical foundation for current and future methods through the lens of information bottleneck. Our new generalization bounds scale with the degree of information bottleneck, unlike the previous bounds that scale with the number of parameters, VC dimension, Rademacher complexity, stability or robustness. Our code is publicly available at: https://github.com/xu-ji/information-bottleneck

This paper releases and analyzes a month-long trace of 85 billion user requests and 11.9 million cold starts from Huawei's serverless cloud platform. Our analysis spans workloads from five data centers. We focus on cold starts and provide a comprehensive examination of the underlying factors influencing the number and duration of cold starts. These factors include trigger types, request synchronicity, runtime languages, and function resource allocations. We investigate components of cold starts, including pod allocation time, code and dependency deployment time, and scheduling delays, and examine their relationships with runtime languages, trigger types, and resource allocation. We introduce pod utility ratio to measure the pod's useful lifetime relative to its cold start time, giving a more complete picture of cold starts, and see that some pods with long cold start times have longer useful lifetimes. Our findings reveal the complexity and multifaceted origins of the number, duration, and characteristics of cold starts, driven by differences in trigger types, runtime languages, and function resource allocations. For example, cold starts in Region 1 take up to 7 seconds, dominated by dependency deployment time and scheduling. In Region 2, cold starts take up to 3 seconds and are dominated by pod allocation time. Based on this, we identify opportunities to reduce the number and duration of cold starts using strategies for multi-region scheduling. Finally, we suggest directions for future research to address these challenges and enhance the performance of serverless cloud platforms. Our datasets and code are available here https://github.com/sir-lab/data-release

Large Language Models (LLMs) with Mixture of Experts (MoE) architectures achieve remarkable performance improvements, but their random expert selection mechanism introduces significant data movement overhead that becomes the dominant bottleneck in multi-unit serving systems. To forecast the patterns underlying this data movement, we conduct comprehensive data-movement-centric profiling across three state-of-the-art large-scale MoE models (200B- 671B) using over 24,000 requests spanning diverse workloads. With the resulting 150GB+ trace files, we perform systematic analysis from both temporal and spatial perspectives and distill six key insights to guide the design of diverse future serving systems. Taking wafer-scale GPUs as a case study, we demonstrate that minor architectural modifications leveraging our insights achieve substantial performance gains, delivering 6.3X and 4.0X average speedups on DeepSeek V3 and Qwen3, respectively. Our work provides the first comprehensive data-centric analysis of MoE models at scale. Our profiling traces and analysis results are publicly available at {https://huggingface.co/datasets/core12345/MoE_expert_selection_trace. We will also release our simulation framework shortly to facilitate future research in this area.

The pervasive "memory wall" bottleneck is significantly amplified in modern large-scale Mixture-of-Experts (MoE) architectures. MoE's inherent architectural sparsity leads to sparse arithmetic compute and also introduces substantial activation memory overheads -- driven by large token routing buffers and the need to materialize and buffer intermediate tensors. This memory pressure limits the maximum batch size and sequence length that can fit on GPUs, and also results in excessive data movements that hinders performance and efficient model scaling. We present MoEBlaze, a memory-efficient MoE training framework that addresses these issues through a co-designed system approach: (i) an end-to-end token dispatch and MoE training method with optimized data structures to eliminate intermediate buffers and activation materializing, and (ii) co-designed kernels with smart activation checkpoint to mitigate memory footprint while simultaneously achieving better performance. We demonstrate that MoEBlaze can achieve over 4x speedups and over 50% memory savings compared to existing MoE frameworks.

Efficient parallelism is necessary for achieving low-latency, high-throughput inference with large language models (LLMs). Tensor parallelism (TP) is the state-of-the-art method for reducing LLM response latency, however GPU communications reduces combined token throughput. On the other hand, data parallelism (DP) obtains a higher throughput yet is slow in response latency. Best of both worlds does not exist, and it is not possible to combine TP and DP because of the KV cache variance across the parallelisms. We notice Sequence Parallelism (SP - Ulysses in training) has similar properties as DP but with KV cache invariance. We adapt SP to inference, and combine it with TP to get the best of both worlds. Our solution: Shift Parallelism. Shift Parallelism dynamically switches across TP and SP, and minimizes latency in low traffic without losing throughput in high traffic. The efficient GPU communications of Shift Parallelism yields up to i) 1.51x faster response in interactive workloads and ii) 50% higher throughput in batch workloads, compared to a TP-only solution. We evaluate Shift Parallelism with real-world production traces with dynamic traffic patterns as well as synthetic benchmarking patterns across models, context sizes, and arrival rates. All results affirm the same: Shift Parallelism has a better the latency vs. throughput tradeoff than TP or DP, and hence obtains low latency without degrading throughput in dynamic workloads.

Industrial asset operations workflows are latency-sensitive because a single user query may require coordination over sensor data, work orders, failure modes, forecasting tools, and domain-specific agents. We evaluate this problem on AssetOpsBench (AOB), an industrial agent benchmark whose plan-execute pipeline exposes repeated overhead from tool discovery, LLM planning, MCP tool execution, and final summarization. Existing LLM caching techniques such as KV-cache reuse and embedding-based semantic caching were designed for chatbot serving and break down when output validity depends on time, asset, or sensor parameters. We propose two complementary optimization layers for AOB plan-execute pipelines: a temporal semantic cache and a set of MCP workflow optimizations combining disk-backed tool-discovery caching and dependency-aware parallel step execution. MCP workflow optimizations corresponded to a 1.67x speedup and reduced median end-to-end latency by about 40.0% while the temporal-cache benchmark achieved a median of 30.6x speedup on cache hits. Beyond the speedup, our results expose a concrete failure mode of pure semantic caching for parameter-rich industrial queries, providing a critical analysis of how caching choices interact with evaluation correctness in MCP-backed agent benchmarks.